AT&T SB67108 user manual Please refer to Handset battery installation

Page 89

Appendix

Troubleshooting

The batteries do

•

If the cordless handset is in the charger

not hold a charge.

 

and the charge light is not on, refer to The

 

 

charge light is off in this Troubleshooting

 

 

guide.

 

•

Charge the battery in the cordless handset

 

 

for at least 16 hours. For optimum daily

 

 

performance, return the cordless handset to

 

 

the charger when not in use.

 

•

If the battery is depleted, it might take

 

 

approximately four minutes to charge the

 

 

handset before it can resume display on the

 

 

screen.

 

•

You might need to purchase a new battery.

 

 

Please refer to Handset battery installation

 

 

and charging in this user’s manual.

I get noise, static, or weak signals even when

I’m near the telephone base.

•If you subscribe to high-speed Internet service (digital subscriber line - DSL) through your telephone lines, you must install a DSL filter between the telephone line cord and the telephone wall jack. The filter prevents noise and caller ID problems as a result of DSL interference. Please contact your DSL service provider for more information about DSL filters.

•You may be able to improve the performance of your cordless phone by installing your new telephone base as far as possible from any other existing cordless telephone system that may already be installed.

83

Page 88 Page 90
Image 89
Page 88 Page 90
Contents User’s manual 888 915-2007. In Canada, dial 1 866 Parts checklist Table of contents Directory Index PHONE/FLASH Quick reference guideMain menu Using menusAvoid placing the handset and charger too close to InstallationImportant Information Charger installationLow battery Handset battery installation and chargingCharging Charge completedStep Low battery indicator Registration & sel Register HS. Then put HS Add and register handsetsAdd and register handsets Deregister all handsets Deregister all handsets Belt clip and optional headset Install belt clip as shown below if desiredRinger volume Handset setupMenu settings LCD contrast Ringer toneLevels to optimize readability in different lighting DIR or CIDPress DIR or CID to select English or Espaňol Key toneLanguage Change handset name Line selectionHold reminder Customer support Speed dialEnter, edit or delete a speed dial number Lights Screen icons, indicator tones and lightsIndicator tones Fast answer mode. Press MENU/ENTER Mailbox setupSet access code remote access code and mailbox security Notify alert Turn alert on or off Set alert number Press MENU/ENTER to select Alert call #Call alert confirmation Screen displays Press Phone or Spkr to confirm alert callAnncemnt setup. Press MENU/ENTER Announcement setupPlay the current personal announcement Record a new personal announcementMailbox setup Handset basic operation Answering a call To answer a call Press PHONE/FLASH or Spkr Auto off Temporary ringer silencingTo view the ten most recently dialed numbers Last number redialingTo redial a number To edit a numberOptions while on calls To record a call To cancel call privacyRecording a call Play back a recorded call While recording a callMute To mute a callHold Conference and call transfer featuresSwitching between lines Chain dialing To access the directory while on a callJoin a call in progress To talk privately with one external party Three-way conference callsTo talk privately with one internal party To drop one lineTo end a conference call To drop an intercom callCovm on/off Make an intercom call IntercomAnswer an incoming call during an intercom call Call transfer using intercomAnswer an intercom call End an intercom callCall transfer using intercom PTT call to a handset or base Push to talk PTT intercomPress DIR or CID to choose the desired handset or base PTT to *Base Release PTT key to stop . WhenPress and hold PTT on the side of your handset until PTT call to all handsets and baseYour handset screen shows PTT to All PTT to AllEnd PTT call Call to a handset or base or PTT call to all handsetsConvert PTT call to intercom call Exit the directory About the directoryCapacity Create and store a directory entry Create directory entriesStore a pause in a directory number Store a flash in a directory number Review directory Review directory entries When the handset is idleSearch by name Search directoryDisplay dial Dial, delete or edit entriesDelete an entry Delete all entriesInformation about caller ID with call waiting About caller ID call logHandset screen display Caller ID historyHow caller ID history call log works Caller ID history Memory match Missed new calls indicatorCaller ID operation Make a call log entry ready to dial Review caller ID historyDelete all caller ID entries Dial a call log entrySave a call log entry to the directory On-screen message Reason Reasons for missing caller ID informationAnswering system and voicemail Handset voicemail box answering systemGeneral mailbox Setting your system to automatically answer callsAuto attendant Record announcementNew message indication Voice promptsListen to new messages in the handset mailbox Message playbackPlay all old messages in the handset mailbox Listen to new messages in the general mailboxOptions during playback When messages are playing on the handsetDelete all old messages Delete all old messages in the handset mailboxPress DIR or CID to scroll to Delete all old. Press Record and deliver a memo in the general mailbox Recording and delivering memosRecord and deliver a memo in a handset mailbox Remote commands Remote accessTo remotely access the answering system Press to transfer the current message during Handset display screen messages REC Taking care of your telephone MaintenanceSafety information Important safety informationEspecially about cordless telephones Pacemaker patients FCC part 68 and Acta Industry Canada FCC part Limited warranty Limited warranty Limited warranty Dect 6.0 digital technology Technical specificationsInstallation and charging in this user’s TroubleshootingTroubleshooting Troubleshooting Please refer to Handset battery installation Troubleshooting Troubleshooting Troubleshooting Troubleshooting When using a speakerphone, controlling Troubleshooting Troubleshooting Troubleshooting Review entries IndexIndex Index Action Remote command Remote access wallet card

SB67108 specifications

The AT&T SB67108 is a cordless telephone system designed specifically for business use, offering a rich set of features tailored for professional environments. This device epitomizes reliability and advanced communication technology, making it a solid choice for small enterprises, offices, and home-based businesses.

One of the key features of the SB67108 is its DECT 6.0 technology, which ensures superior sound quality and extended range. DECT (Digital Enhanced Cordless Telecommunications) minimizes interference and provides a more secure connection, making conversations clearer and more reliable. This technology enables a strong linkage between the base unit and the handsets, allowing users to have uninterrupted calls even when they are away from the main office space.

The SB67108 comes equipped with a base station that can support up to four handsets, providing flexibility for offices of various sizes. It is particularly beneficial for businesses with multiple employees who need to communicate effectively and efficiently. Each handset is lightweight and ergonomically designed, ensuring comfort during extended usage.

Another important aspect of the AT&T SB67108 is its user-friendly interface. The large backlit display on the handsets makes it easy to navigate through the various features, including phonebook entries, call logs, and settings. The device allows for 50 name and number entries, making it easy to store important contacts for quick dialing.

In terms of functionality, the SB67108 offers a range of calling features, including caller ID, call waiting, and conference calling, enabling multiple parties to connect seamlessly. Additionally, it provides a speakerphone option, allowing for hands-free communication—a particularly useful feature for multitasking in busy office environments.

The AT&T SB67108 also prioritizes energy efficiency. It includes a power-saving mode that reduces power consumption when the phone is not in active use. Furthermore, it operates with rechargeable batteries that provide extended talk and standby time, ensuring that users are rarely left without the ability to communicate.

In summary, the AT&T SB67108 is a multifunctional cordless phone system that combines advanced DECT 6.0 technology with a range of features designed for business needs. Its robust performance, user-friendly design, and energy-efficient operation make it a valuable asset for any professional setting, enhancing productivity and communication for users everywhere.
Top Page Image Contents