Getting Started
Telephone base installation (2-line jack)
If you have a
Line 1 + Line 2
Connect the black line cord to jack
labeled LINE 1/L1+L2.
Plug base power cord transformer into electrical outlet.
Connect handset cord to corded handset.
Line identification
To identify phone lines, press SPEAKERPHONE, then call one of your telephone numbers. If you hear a busy signal, Line 1 is the number you called. If Line 2 rings, it is the number you called.
NOTE: Use only the power cord supplied with this product.
If you need a replacement, call
Be sure to use an electrical outlet not controlled by a wall switch.
6