AT&T 1455 Telephone Operation, Handset Ringer Style/Battery Save, Temporary Tone Dialing

Page 11

TELEPHONE OPERATION

Handset Ringer Style/Battery Save

You can select from four different handset ringer styles, or turn the ringer off and extend the battery life.

1Make sure the handset is off.

2Press Gto enter programming mode.

3Press >until the screen displays RINGER:.

4Press S. The screen displays the current setting.

5Press <or >to select 1, 2, 3, 4, or OFF. You will hear a sample of each ring.

6Press Sto choose the displayed ringer setting.

Temporary Tone Dialing

If you have dial pulse (rotary) service, you can change from dial pulse to touch tone dialing during a call by pressing *. This is useful if you need to send touch tone signals for access to telephone banking or long-distance services.

1Dial the number.

2Press *. Buttons pressed after this send touch tone signals.

3After you hang up, the phone automatically returns to

dial pulse (rotary) service.

Headset Jack

You can use this telephone hands-free when you install any AT&T 2.5 mm headset, purchased separately.

Plug the headset into the jack located on the right side of the handset (under the small rubber flap).

Do not force the connection, but make sure the plug

fits securely.

8

Image 11

Contents Caller ID/Call Waiting Advanced American Telephones. All rights reserved Contents About Caller Identification Caller ID Before YOU BeginBefore You Install InstallationTable/Desk Installation Charge the handset battery Wall Installation Headline L-SUB Page/Handset Locator Telephone OperationHeadset Jack Handset Ringer Style/Battery SaveTelephone Operation Temporary Tone DialingDisplay Screen Messages Operating RangeStore a Number/Name in Memory Telephone MemoryDial Edit Erase Edit a Number/Name Stored in MemoryDial a Memory Number Delete a Number/Name Stored in MemoryStore a Number/Name in the Directory Telephone DirectoryEdit a Number/Name Stored in the Directory Dial a Number from the Directory Delete a Number/Name Stored in the DirectoryReview Call History Caller ID OperationAbout Call History Delete All Calls Delete Records from Call HistoryDial a Displayed Number Delete a Specific CallDistinctive RING?Y Store a Call History Record in the DirectoryAbout Mailboxes Audible IndicatorsHEADLINEATTHERBASE-SUB Set the ClockRecord Your Announcement AT the BaseFeature Summary Answering System Feature SetupDelete Messages Adjust Playback VolumeAtheadlinethe BASEL-SUB Listen to, Save & Delete MessagesMessage Window Display Call Screening/InterceptRecord a Memo Voice Menu Remote Access CommandsAT Touch Tone Phone Connect with the Answering SystemTurn system on AT Touchheadlinetone PHONER-SUBBatteries Charge the Handset Battery PackReplacing the Handset Battery Pack If the phone doesn’t work at all, check these items first If the phone does not ring when you receive a callCase of Difficulty If you lose a call after changing channels If you hear noise or interference when using the phoneIf you hear other calls while using your phone If your outgoing announcement isn’t clear If messages are incompleteIf you have difficulty hearing messages If CL appears in the Message WindowIf callers cannot leave messages in Mailbox 2 or Answering System Remote CommandsMachine off press #0 again Press