AT&T 1455 user manual Operating Range, Display Screen Messages

Page 12

TELEPHONE OPERATION

Operating Range

This cordless telephone operates within the maximum power allowed by the Federal Communications Commission (FCC). Even so, this handset and base can communicate over only a certain distance — which can vary with the locations of the base and handset, the weather, and the construction of your home or office. For best performance, keep the base antenna fully upright.

If you receive a call while you are out of range, the handset might not ring — or if it does ring, the call might not connect when you press P. Move closer to the base, then press Pto answer the call.

If you move out of range during a phone conversation, you might hear noise or interference. To improve reception, move closer to the base.

If you move out of range without pressing O, your phone will be left “off the hook.” To hang up properly, walk back into range, periodically pressing O.

Display Screen Messages

Screen Displays:

When:

NO LINE

The base is not connected to the telephone line,

 

or the line is not working.

 

 

RINGING

There is a call coming in.

CONNECTING

The handset is waiting for a dial tone.

 

 

PHONE ON

The handset is in use.

 

 

PAGING

The base is paging the handset.

 

 

HOLD

There is a call on hold.

 

 

EXTENSION IN USE

Another extension on this line is off hook.

 

 

BATTERY LOW

The battery needs to be recharged.

 

 

9

Image 12
Contents Caller ID/Call Waiting Advanced American Telephones. All rights reserved Contents Before YOU Begin About Caller Identification Caller IDInstallation Before You InstallTable/Desk Installation Charge the handset battery Wall Installation Headline L-SUB Telephone Operation Page/Handset LocatorHandset Ringer Style/Battery Save Telephone OperationTemporary Tone Dialing Headset JackOperating Range Display Screen MessagesTelephone Memory Store a Number/Name in MemoryEdit a Number/Name Stored in Memory Dial Edit EraseDelete a Number/Name Stored in Memory Dial a Memory NumberTelephone Directory Store a Number/Name in the DirectoryEdit a Number/Name Stored in the Directory Delete a Number/Name Stored in the Directory Dial a Number from the DirectoryCaller ID Operation About Call HistoryReview Call History Delete Records from Call History Dial a Displayed NumberDelete a Specific Call Delete All CallsStore a Call History Record in the Directory Distinctive RING?YAudible Indicators HEADLINEATTHERBASE-SUBSet the Clock About MailboxesAT the Base Record Your AnnouncementAnswering System Feature Setup Feature SummaryAdjust Playback Volume Atheadlinethe BASEL-SUBListen to, Save & Delete Messages Delete MessagesCall Screening/Intercept Record a MemoMessage Window Display Remote Access Commands AT Touch Tone PhoneConnect with the Answering System Voice MenuAT Touchheadlinetone PHONER-SUB Turn system onCharge the Handset Battery Pack BatteriesReplacing the Handset Battery Pack If the phone does not ring when you receive a call Case of DifficultyIf the phone doesn’t work at all, check these items first If you hear noise or interference when using the phone If you hear other calls while using your phoneIf you lose a call after changing channels If messages are incomplete If you have difficulty hearing messagesIf CL appears in the Message Window If your outgoing announcement isn’t clearIf callers cannot leave messages in Mailbox 2 or Remote Commands Answering SystemPress Machine off press #0 again