AT&T 1455 user manual Charge the handset battery

Page 7

INSTALLATION

3Charge the handset battery.

Place the handset in the base. Charge the battery for at least 12 hours the first time.

4Check for dial tone.

After the batteries are charged, pick up the handset and press P; you should hear a dial tone.

5Set the dial mode.

If you have touch tone service, the phone is ready to use as soon as the batteries are charged.

If you have dial pulse (rotary) service, you’ll need to change the dial mode.

•Press Gon the handset to enter programming mode.

•Press <or >until the screen displays DIAL MODE: and the currently selected mode.

•Press S. The current setting blinks.

•Press >to select TONE or PULSE.

•Press S, to save the displayed mode.

4

Image 7

Contents Caller ID/Call Waiting Advanced American Telephones. All rights reserved Contents About Caller Identification Caller ID Before YOU BeginBefore You Install InstallationTable/Desk Installation Charge the handset battery Wall Installation Headline L-SUB Page/Handset Locator Telephone OperationHeadset Jack Handset Ringer Style/Battery SaveTelephone Operation Temporary Tone DialingDisplay Screen Messages Operating RangeStore a Number/Name in Memory Telephone MemoryDial Edit Erase Edit a Number/Name Stored in MemoryDial a Memory Number Delete a Number/Name Stored in MemoryStore a Number/Name in the Directory Telephone DirectoryEdit a Number/Name Stored in the Directory Dial a Number from the Directory Delete a Number/Name Stored in the DirectoryAbout Call History Caller ID OperationReview Call History Delete All Calls Delete Records from Call HistoryDial a Displayed Number Delete a Specific CallDistinctive RING?Y Store a Call History Record in the DirectoryAbout Mailboxes Audible IndicatorsHEADLINEATTHERBASE-SUB Set the ClockRecord Your Announcement AT the BaseFeature Summary Answering System Feature SetupDelete Messages Adjust Playback VolumeAtheadlinethe BASEL-SUB Listen to, Save & Delete MessagesRecord a Memo Call Screening/InterceptMessage Window Display Voice Menu Remote Access CommandsAT Touch Tone Phone Connect with the Answering SystemTurn system on AT Touchheadlinetone PHONER-SUBBatteries Charge the Handset Battery PackReplacing the Handset Battery Pack Case of Difficulty If the phone does not ring when you receive a callIf the phone doesn’t work at all, check these items first If you hear other calls while using your phone If you hear noise or interference when using the phoneIf you lose a call after changing channels If your outgoing announcement isn’t clear If messages are incompleteIf you have difficulty hearing messages If CL appears in the Message WindowIf callers cannot leave messages in Mailbox 2 or Answering System Remote CommandsMachine off press #0 again Press