AT&T 1455 user manual Replacing the Handset Battery Pack

Page 30

BATTERIES

Replacing the Handset Battery Pack

1Remove the battery compartment cover on the handset by pressing on the indentation and sliding the cover downward.

2Lift out the old battery pack and disconnect.

3Align the two holes in the new battery pack’s plug with the socket pins, and snap the plug into place. Place the battery pack in the compartment with the wires in the lower left corner, along the bottom of the battery pack.

4Replace the cover by sliding it up into place.

5The new battery pack must be charged before using the phone. Place the handset in the base and allow it to charge for at least

12 hours the first charge. The telephone might operate before that, but for best performance, let the battery pack charge fully.

27

Image 30

Contents Caller ID/Call Waiting Advanced American Telephones. All rights reserved Contents Before YOU Begin About Caller Identification Caller IDInstallation Before You InstallTable/Desk Installation Charge the handset battery Wall Installation Headline L-SUB Telephone Operation Page/Handset LocatorTemporary Tone Dialing Handset Ringer Style/Battery SaveTelephone Operation Headset JackOperating Range Display Screen MessagesTelephone Memory Store a Number/Name in MemoryEdit a Number/Name Stored in Memory Dial Edit EraseDelete a Number/Name Stored in Memory Dial a Memory NumberTelephone Directory Store a Number/Name in the DirectoryEdit a Number/Name Stored in the Directory Delete a Number/Name Stored in the Directory Dial a Number from the DirectoryCaller ID Operation About Call HistoryReview Call History Delete a Specific Call Delete Records from Call HistoryDial a Displayed Number Delete All CallsStore a Call History Record in the Directory Distinctive RING?YSet the Clock Audible IndicatorsHEADLINEATTHERBASE-SUB About MailboxesAT the Base Record Your AnnouncementAnswering System Feature Setup Feature SummaryListen to, Save & Delete Messages Adjust Playback VolumeAtheadlinethe BASEL-SUB Delete MessagesCall Screening/Intercept Record a MemoMessage Window Display Connect with the Answering System Remote Access Commands AT Touch Tone Phone Voice MenuAT Touchheadlinetone PHONER-SUB Turn system onCharge the Handset Battery Pack BatteriesReplacing the Handset Battery Pack If the phone does not ring when you receive a call Case of DifficultyIf the phone doesn’t work at all, check these items first If you hear noise or interference when using the phone If you hear other calls while using your phoneIf you lose a call after changing channels If CL appears in the Message Window If messages are incompleteIf you have difficulty hearing messages If your outgoing announcement isn’t clearIf callers cannot leave messages in Mailbox 2 or Remote Commands Answering SystemPress Machine off press #0 again