Number of messages (or during playback, message number currently playing).
ANNC. RECORD
Press PLAY/STOP to begin or end message playback.
1. Press PLAY/STOP
“You have [XX] new messages and [XX] old messages.”
Message playback begins. See options at right.
2. Press
PLAY/STOP to end message playback.
NOTES:
1.If F and the total message number is flashing in the message window, memory is full. You will have to delete some messages before new ones can be received.
2.The maximum record time can be more than 11 minutes.
3.If you receive calls when the memory is full, the telephone will ring 10 times, then answer and announce “Memory is full, enter the remote access code.”
4.New (unheard) messages cannot be deleted.
Answering system
Message playback
Press 
PLAY/STOP to listen to messages. The system announces the number of messages, then begins playback.
If you have new messages, you will hear only the new messages (oldest first). If there are no new messages, the system will playback all messages (oldest first).
Announcements
•When playback begins, you will hear the total number of messages.
•Before each message, you will hear the day and time it was received.
•After playing all new messages, you will hear "End of new messages." You will hear “End of messages” after the answering system has finished the playback of all messages. If the system has less than five minutes of recording time left, you will hear the estimated time remaining.
Options during playback
•Press 
VOL button to adjust the speaker volume.
•Press 
SKIP to skip to next message.
•Press 
REPEAT to repeat the message currently playing. Press twice to hear previous message.
•Press 
DELETE to delete the message being played back.
•Press 
PLAY/STOP to stop playback.
Delete all messages
To delete all old messages, press 
DELETE twice when the phone is not in use.
34