AT&T EL42108 user manual Remote access, Stop

1. Dial your telephone number from any touch-tone telephone.

2. When the system answers,

enter two digit remote access code (19 unless you have changed it).

3. Enter remote commands (see list at right).

4. Hang up to end the call and save all undeleted messages.

NOTE: If you pause for more than four seconds during remote access, you will hear a help menu listing all features and commands. If there is no command entered for another

15 seconds, the call will end automatically.

Answering system

Remote access

A two digit security code is required to access your answering system from any touch-tone telephone. This code is 19 by default, see Changing feature options (page 33) to change it.

Play all messages	Press to hear all messages.
1
Play new messages	Press to hear new messages.
2
Delete the message	Press once during playback to
3	delete current message. Press
33	twice to delete all old messages.
Repeat or go back	Press during the caller’s
4	message to repeat the message.
	Press during the beginning of
	the day and time announcement
	to go back to the previous
	message.
Stop	Press to stop any operation (stop
5	playback, stop recording).
Skip to next message	Press to skip the current
6	message and advance to next
	message.
Record announcement	Press *7, wait for the beep, then
*7 to begin recording	begin speaking. Press 5 to stop
	recording and hear the playback
5 to stop recording
	of new announcement.
Help menu	Press to hear list of features &
*5	commands.
Turn system off	Press to turn off answering
0	system. Incoming calls will no
	longer be answered.
Turn system on	If off, system will answer after
0	10 rings. Enter your access
	code, then press 0 to turn the
	answering system on.
Exit	Press 8 or hang up to end the
8	remote access call.

38