Turning Your Radio On and Off
See page 13 for a basic radio diagram.
Turn P clockwise to turn the radio on, and counterclockwise to turn the radio off. When the radio is on, the transmit light on the top of the radio flashes every
3 seconds.
When you turn the radio on, the radio chirps and the display briefly shows all features and display segments.
The radio then displays the current channel (larger number in the center) and the frequency assigned to that channel (on the right indicated by l).
The Interference Eliminator Code displays briefly (indicated by y), then the current channel remains displayed.
Getting Started
19
Getting Started
Adjusting the Volume
Turn P clockwise to increase the volume, and counterclockwise to decrease the volume.
Note: Do not hold the radio too close to your ear when adjusting the volume.
Reading the Display |
|
| ||||
Signal Strength and Channel Busy Indicator |
| VibraCall® Alert Indicator | ||||
|
|
|
|
|
| Frequency and |
Battery Meter |
|
|
| Interference Eliminator | ||
|
| |||||
|
|
|
|
|
| Code |
Channel |
| Keypad Lock | ||||
Interference Eliminator |
| |||||
| ||||||
|
| |||||
Code Indicator |
| Frequency Indicator | ||||
Programming Mode |
| Microphone Gain and | ||||
Scan (CLS1410 Only) |
|
|
|
| VOX (CLS1410 only) | |
|
|
| ||||
|
|
|
|
| ||
|
|
|
| |||
20