Troubleshooting
Symptom | Try This: | |
|
| |
No Power | Recharge or replace Li Ion battery. | |
Reposition or replace Alkaline batteries. | ||
| ||
|
| |
| Make sure Push to Talk is completely pressed while | |
Message not | transmitting. | |
Recharge, replace, and/or reposition batteries. | ||
transmitted | ||
Verify the transmit light is illuminated while speaking. | ||
| ||
| Verify Channel, Frequency, and Code settings are correct. | |
|
| |
Hearing other |
| |
noises or | Frequency may be in use. Change on all radios if possible (see | |
conversation on | page 28 and 29). | |
a channel |
| |
|
| |
Poor audio | Bandwidth does not match. For optimal audio quality when | |
communicating with _Series radios, the bandwidth of other | ||
quality | ||
radios should be set to 12.5 kHz, if possible. | ||
|
Troubleshooting
35
Troubleshooting
36
Symptom | Try This: | |
|
| |
| Steel and/or concrete structures, heavy foliage, buildings, or | |
Limited talk | vehicles decrease range (see page 22). Check for clear line of | |
sight to improve range. | ||
range | ||
Wearing radio close to body such as in a pocket or on a belt | ||
| ||
| decreases range. Change location of radio. | |
|
| |
| Confirm radios have the same channel, frequency, and | |
| interference eliminator code settings (see page 26). | |
Message not | Recharge, replace, and/or reposition batteries. | |
received | Move to another location. Obstructions and operating indoors or | |
| in vehicles may decrease range. | |
| Verify radio is not in scan mode (CLS1410 only, see page 24). | |
|
| |
Heavy static or | Radios are too close. They must be at least 5 feet apart. | |
Radios are too far apart or obstacles are interfering with | ||
interference | ||
| transmission. | |
|
| |
Keypad locked | Unlock by holding Sfor 3 seconds. | |
|
| |
Low batteries | Recharge or replace batteries. Extreme operating temperatures | |
affect battery life. | ||
|