Motorola manual Frequency Channel CLS1110 CLS1410, Selecting a Channel CLS1410 Only

Page 15

Factory Default Settings

Your radio is programmed at the factory to the following settings:

 

 

Frequency

 

Channel

 

CLS1110

CLS1410

 

1

 

 

 

 

 

2

2

Mode

2

 

 

 

 

 

8

 

 

 

3

 

Not available

 

 

 

5

Programming

4

 

 

 

 

 

6

 

 

 

 

 

 

 

 

Code

1

 

 

 

 

 

 

Call Tone/

Off (0)

 

VibraCall®

 

 

 

 

VOX

Not available

Off (0)

 

 

 

 

 

Microphone

2 (medium sensitivity)

 

Gain

 

 

 

 

 

 

 

 

 

To restore the factory settings, turn the radio on while holding Push to Talk and S for 3 seconds.

27

Programming Mode

28

Entering Programming Mode

Press and hold Push to Talk and Tfor 3 seconds while turning the radio on. The radio beeps and displays k, the channel number flashes, and the frequency (indicated by l) and code (indicated by y) display alternately.

Note: If you press and release the Push to Talk button when programming CSL1410 models, you will return to the front of the Programming Mode.

Selecting a Channel (CLS1410 Only)

1. In programming mode, press Suntil the channel number flashes

and the frequency and code display alternately (this is the first setting after you enter programming mode).

2. Press [ or ] to select the channel.

3.Press and hold Push to Talk to exit programming mode, or press S to continue programming.

Programming the Frequency

1. In programming mode, press Suntil l displays and the

frequency number flashes. 2. Press [ or ] to select the frequency.

3. Press and hold Push to Talk to exit programming mode, or press Sto continue programming.

Note: See page 39 for information on frequencies for communicating with other business radios. If you are matching your _ Series radio to an existing Spirit GT radio, see page 45.

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Series TWO-WAY Radio Introduction Faxed Mailed By Phone or Web USA TTY Text Telephone On the WebExposure to Radio Frequency Energy Transmit and Receive ProcedureElectromagnetic Interference/Compatibility Portable Radio Operation and EME ExposureOperational Warnings Safety and General Use While DrivingAntennas Battery Charger Safety InstructionsOperational Cautions Blasting Caps and AreasGetting Started Radio ControlsUsing the Drop-in Charger Installing the BatteriesLi Ion Battery Charging the BatteryCharging Status LEDs Using the 56531 Multi-Unit ChargerBattery Meter Battery LifeAdjusting the Volume Turning Your Radio On and OffReading the Display With Compatible VOX Accessories Talking and ReceivingIndustrial Multi-Level Outdoor Scanning CLS1410 Only Setting the VOX SensitivityLocking the Keypad Monitoring a ChannelSkipping and Removing Channels While Scanning Programming ModeFrequency Channel CLS1110 CLS1410 Selecting a Channel CLS1410 OnlyProgramming the Frequency Programming the Interference Eliminator Code Programming the Available Channels CLS1410 onlyProgramming Call Tones and VibraCall CLS1410 only Cloning Radio Settings Programming Microphone GainEditing the Scan List CLS1410 Only Radio On Advanced FeaturesPress This Button Default To Do This To Do ThisSymptom Try This TroubleshootingUse and Care SymptomDisplay Frequency Number Frequencies and BandwidthsUHF Frequencies Display FrequencyDisplay Code Interference Eliminator CodesDigital Interference Eliminator Codes Display DigitalDisplay Digital Number Code What This Warranty Covers Spirit GT Series ProgrammingII. What the Period of Coverage Is III. Who is Covered IV. What We Will Do to Correct Warranty ProblemsHow to Obtain Warranty Service or Other Information VI. What This Warranty Does Not CoverVII. Some Other Limitations VIII. Patent and Software Provisions Page Set a Call Tone Microphone Gain Edit the Scan List Series Programming Quick ReferenceMotorola.com
Top Page Image Contents