Setting the VOX Sensitivity

6.To transmit, speak into the accessory microphone. To receive, stop talking. To disable VOX operation, press Push to Talk or remove the audio accessory.

Note: To order accessories, visit www.motorola.com/radios/professional, call 1-800-448-6686, or contact your point of purchase.

You can adjust the sensitivity of your radio’s accessory or microphone during VOX operation to suit different operating environments. These menus appear only when the VOX feature is in use, which is indicated by g.

1.	Press Suntil g displays. The radio displays H when you are

	setting the external VOX (with audio accessory).
2.	Press [ or ] to select the sensitivity level:

	0 = Off 1 = Low	2 = Medium 3 = High


Locking the Keypad		External VOX
			020995o

You can lock the keypad to avoid accidentally changing your radio settings.

1.Press and hold Sfor 3 seconds.

2.To unlock, press and hold Sfor 3 seconds.

Talking and Receiving

Monitoring a Channel

Monitoring allows you to check for activity on a channel.

1. Press and hold T. If the channel is clear to use, you will hear static and w and 0 will display.

2. Press Tagain to stop monitoring.

Scanning (CLS1410 Only)

You can scan up to 4 channels and frequencies. When the radio

detects activity, it stops scanning and locks in on the active channel. This allows you to talk and listen to the person transmitting without changing channels.

1.To start scanning, briefly press T.

The scan icon h displays and the radio begins to scan the channels. When the radio detects activity, it stops on that channel and displays w and the channel number.

2.To talk to the person transmitting without switching channels, press Push to Talk within 5 seconds. If no transmission occurs within 5 seconds, scanning resumes.

3.To stop scanning, briefly press T.

If you press Push to Talk while the radio is scanning, the radio transmits on the channel you were on before you started scanning.