Motorola CLS1110 CLS1410 manual Installing the Batteries, Li Ion Battery, AAA Alkaline Batteries

Page 9

Installing the Batteries

Your radio uses a rechargeable Lithium Ion (Li Ion) battery or 3 AAA alkaline batteries with the 56564 AAA Battery Tray (not included with all models).

Li Ion Battery

1.If the battery door is already in place, push down on the recess on the door and slide it off the radio.

2.Insert the battery, printed arrows first, into the battery compartment and press down to secure firmly in place.

3. Slide and snap the battery door into place.

AAA Alkaline Batteries

1.If the battery door is already in place, push down on the recess on the door and slide it off the radio.

2.Insert 3 AAA batteries into the battery tray as shown by the markings inside the tray.

3.Insert the battery tray into the battery compartment and press down to secure firmly in place.

4.Slide and snap the battery door into place.

5.Press Suntil A or n flashes (this menu does not appear if using a Motorola Li Ion battery).

6.Press [ or ] to select A for alkaline batteries, or n for rechargeable AAA cells.

Getting Started

15

Getting Started

Charging the Battery

Use only the charger supplied with the radio, or other _Series power accessories. For optimum battery life, do not charge the battery for prolonged periods after it is fully charged. Charging the battery over the weekend is acceptable.

Using the Drop-in Charger

1. Place the charger on a flat surface.

2. Insert the plug of the power cord into the jack on the charger.

3. Plug the cord into an AC outlet.

4. Turn the radio off. If the radio is on while charging, it will take longer to fully charge.

5. Insert the radio (with battery installed) into the front charging pocket.

Note: The radio will fit in the charger with the holster on.

The drop-in charger will also sequentially charge a spare SNN5571 Li Ion battery. The spare battery will not begin to charge until the radio battery is fully charged. Both batteries will charge in approximately

2–6 hours.

16

Image 9
Contents Series TWO-WAY Radio Introduction Faxed Mailed By Phone or Web USA TTY Text Telephone On the WebExposure to Radio Frequency Energy Transmit and Receive ProcedureElectromagnetic Interference/Compatibility Portable Radio Operation and EME ExposureOperational Warnings Safety and General Use While DrivingOperational Cautions Battery Charger Safety InstructionsBlasting Caps and Areas AntennasGetting Started Radio ControlsLi Ion Battery Installing the BatteriesCharging the Battery Using the Drop-in ChargerBattery Meter Using the 56531 Multi-Unit ChargerBattery Life Charging Status LEDsAdjusting the Volume Turning Your Radio On and OffReading the Display With Compatible VOX Accessories Talking and ReceivingIndustrial Multi-Level Outdoor Locking the Keypad Setting the VOX SensitivityMonitoring a Channel Scanning CLS1410 OnlySkipping and Removing Channels While Scanning Programming ModeFrequency Channel CLS1110 CLS1410 Selecting a Channel CLS1410 OnlyProgramming the Frequency Programming the Interference Eliminator Code Programming the Available Channels CLS1410 onlyProgramming Call Tones and VibraCall CLS1410 only Cloning Radio Settings Programming Microphone GainEditing the Scan List CLS1410 Only Press This Button Default To Do This Advanced FeaturesTo Do This Radio OnSymptom Try This TroubleshootingUse and Care SymptomUHF Frequencies Frequencies and BandwidthsDisplay Frequency Display Frequency NumberDisplay Code Interference Eliminator CodesDigital Interference Eliminator Codes Display DigitalDisplay Digital Number Code What This Warranty Covers Spirit GT Series ProgrammingII. What the Period of Coverage Is How to Obtain Warranty Service or Other Information IV. What We Will Do to Correct Warranty ProblemsVI. What This Warranty Does Not Cover III. Who is CoveredVII. Some Other Limitations VIII. Patent and Software Provisions Page Set a Call Tone Microphone Gain Edit the Scan List Series Programming Quick ReferenceMotorola.com