Motorola CLS1110 CLS1410 manual Series Programming Quick Reference

_Series Programming Quick Reference

To enter programming mode, press and hold Push to Talk and Qfor 3 seconds while turning the radio on. The radio beeps and displays k, the channel number flashes, and the frequency (indicated by l) and code (indicated by y) display alternately.

Set the

Channel*

Set the

Frequency

Set the

Interference

Eliminator

Code

Set

Available

Channels*

* CLS1410 Only

Press [or ].

Press Suntil l displays. Press [or ]to change the frequency.

Press Suntil y displays.Press [or ] to change the code.

Press Suntil = displays. Press [or ]to select number of available channels.

_Series Programming Quick Reference

Set a Call Tone

Set the

Microphone

Gain

Edit the Scan List*

Press Suntil E display.s

Press [or ]to select1, 2, or 3 for audible call tones, 4 for VibraCall, or 0 for off (default).

Press Suntil g and ? display. Press [or ]to select:

1Low sensitivity

2Medium sensitivity

3 High sensitivity

Press Suntil h displays and the channel number and Y or n flash. Press [or ]to select the channel, then press Tto select Y (include channel) or n (exclude channel).