Motorola CM300TM manual Menu Buttons, Menu Scroll Buttons, Navigate the Menu, Exit the Menu

Page 17

MENU BUTTONS

Menu Button

If preprogrammed by your dealer/programmer, the two front buttons (Cand D) can be used, in conjunction with other programmable features, to access and select menu options (D); and exit menu mode (C).

The Dbutton can be preprogrammed by your dealer/programmer to either a short or long press to access the Menu Mode.

Menu Scroll Buttons

Used to scroll while in Menu Mode. Refer to the menu navigation chart for menu selectable features at the back of this manual.

Navigate the Menu

Gor Hto scroll through the menu options. If you scroll past the last option, the selection wraps around and starts again.

When you reach the required option, a short press of the Dbutton selects that option and enters the Sub-menu.

Gor Hto scroll through the sub-menu options. Select the option with a short press of the Dbutton.

Exit the Menu

While in Menu Mode, the Cbutton is automatically assigned to completely exit the Menu Mode by a long press or by a series of short presses to exit from a sub-level of the menu hierarchy.

The radio also exits the menu mode if there has been no inputs via the navigation buttons for the “Inactivity Time” or after a selection has been made.

Once you have exited Menu Mode, the C and Dbuttons return to normal programmable condition.

RADIO OVERVIEW

15

English

Image 17

Contents CM300 Computer Software Copyrights Contents Warranty User SettingsAccessories PhoneProduct Safety and RF Exposure Compliance SafetySafety Radio Wide Features CM300 Radio FeaturesSignaling Features IntroductionDtmf PTT ID Radio Overview PERS4Display LED IndicatorsOptional Enhanced Keypad Microphone RMN5029 Number of Times Button is Pressed Entering Characters Using the Dtmf Microphone KeypadIndicator Tones Programmable Buttons Phone Mode Enabled Option Board Disabled EscalertFunction Indicator Short Press Long Press Hold Down Button Programmable FeaturesVoice Operated Toggle VOX on and off. † Transmission Menu Button Menu ButtonsMenu Scroll Buttons Navigate the MenuRadio Overview Getting Started Adjust the VolumeTurn the Radio on or OFF OFFMonitor ReceiveSilent Monitor Open Squelch MonitorTransmit Repeater or Talkaround J ModeSelect either Repeater Mode or Talkaround Mode Home Revert Memory Channel 1 SET Local or Distance ModeStore Memory Channel 1 To Activate Home Revert Memory ChannelProgram PL/DPL Codes VOX OperationGetting Started Selective Radio Inhibit Radio CallsReceive a Selective Call F Send a Selective CallSend a Call Alert Receive a Call Alert page FUse with Enhanced Keypad Microphone RMN5029 Repeater AccessClear AN Emergency Alert Emergency Alerts ESend AN Emergency Alert E Start System Scan G ScanTalkback Stop Auto Scan Stop System ScanStart Auto Scan G Edit a Scan List Restore Channels to the Scan ListDelete a Nuisance Channel Delete ADD or Delete Channels in a Scan ListScanning Sequence Prioritize a Channel in a Scan ListSet Priority Channels Priority ChannelSaved Receive a Phone Call D PhoneMake a Phone Call D Xxxxxxx Add an Entry Edit the Phone ListLOC Delete an EntryEdit an Entry Edit Access/Deaccess CodesPHN Phone Tone Preferences Tone PreferencesFeature What it Does Settings Tone SettingsKeypad ON/OFF Tones Tones ON/OFFEscalert Call Tone TaggingOFF Tone Preferences User Settings Utilities Features SET Squelch Level SET Power Level BSET the Backlight Intensity Option Board ON/OFF aDisplay the Software Version User Settings Limited Warranty Motorola Communication Products WarrantyWarranty II. General Provisions What this Warranty does not Cover VII. Governing LAW Alarm and Accessories AccessoriesAntennas AudioControl Station Data CES Wireless TechnologiesCables Public Address MountingAccessories Turn the Radio On or Off Adjust the VolumeSelect a Radio Channel ReceiveLED Indicators Restore Channels to the Scan ListAudio Indicators for Programmable Buttons Send a Selective CallRx/Tx Repeater mode/ talkarnd modeOn/off Page Page 6881096C22