Motorola CM300TM manual SET Squelch Level, SET Power Level B

Page 51

SET SQUELCH LEVEL

Use this feature to filter out nuisance (unwanted) calls and/or background noise. However, tightening squelch could cause calls from remote locations to be filtered out as well. In this case, normal squelch may be more desirable.

Press the preprogrammed Squelch button (see page 14) to toggle between tight and normal squelch.

– or –

1Dto enter menu mode.

2	Gor Huntil	UTILITY

3	Dto select	UTILITY

4	Gor Huntil	SQUELCH

5	Dto select	SQUELCH

6	Gor Huntil	NORMAL
	-or- until	TIGHT

7Dto select the current setting.

SET POWER LEVEL B

Each channel in your radio has a predefined transmit power level that can be changed.

•High power (S) allows you to reach a radio that is farther away.

•Low power (R) to reach a radio within close proximity.

Note: The R or S symbol appears on the display when High/Low Power Level is selected.

To set the power level, press the preprogrammed Power Level button (see page 14) to toggle between low and high power.

– or –

1Dto enter menu mode.

2	Gor Huntil	UTILITY

3	Dto select	UTILITY

49

USER SETTINGS

English

Image 51

Contents CM300 Computer Software Copyrights Contents Phone User SettingsWarranty AccessoriesProduct Safety and RF Exposure Compliance SafetySafety Introduction CM300 Radio FeaturesRadio Wide Features Signaling FeaturesDtmf PTT ID Radio Overview PERS4Display LED IndicatorsOptional Enhanced Keypad Microphone RMN5029 Number of Times Button is Pressed Entering Characters Using the Dtmf Microphone KeypadIndicator Tones Programmable Buttons Phone Mode Enabled Option Board Disabled EscalertFunction Indicator Short Press Long Press Hold Down Button Programmable FeaturesVoice Operated Toggle VOX on and off. † Transmission Navigate the Menu Menu ButtonsMenu Button Menu Scroll ButtonsRadio Overview OFF Adjust the VolumeGetting Started Turn the Radio on or OFFOpen Squelch Monitor ReceiveMonitor Silent MonitorRepeater or Talkaround J Mode Select either Repeater Mode or Talkaround ModeTransmit To Activate Home Revert Memory Channel SET Local or Distance ModeHome Revert Memory Channel 1 Store Memory Channel 1Program PL/DPL Codes VOX OperationGetting Started Send a Selective Call Radio CallsSelective Radio Inhibit Receive a Selective Call FSend a Call Alert Receive a Call Alert page FUse with Enhanced Keypad Microphone RMN5029 Repeater AccessEmergency Alerts E Send AN Emergency Alert EClear AN Emergency Alert Scan TalkbackStart System Scan G Stop System Scan Start Auto Scan GStop Auto Scan Restore Channels to the Scan List Delete a Nuisance ChannelEdit a Scan List Delete ADD or Delete Channels in a Scan ListPriority Channel Prioritize a Channel in a Scan ListScanning Sequence Set Priority ChannelsSaved Receive a Phone Call D PhoneMake a Phone Call D Xxxxxxx Add an Entry Edit the Phone ListLOC Delete an EntryEdit an Entry Edit Access/Deaccess CodesPHN Phone Tone Preferences Tone PreferencesFeature What it Does Settings Tone SettingsKeypad ON/OFF Tones Tones ON/OFFEscalert Call Tone TaggingOFF Tone Preferences User Settings Utilities Features SET Squelch Level SET Power Level BSET the Backlight Intensity Option Board ON/OFF aDisplay the Software Version User Settings Limited Warranty Motorola Communication Products WarrantyWarranty II. General Provisions What this Warranty does not Cover VII. Governing LAW Audio AccessoriesAlarm and Accessories AntennasData CES Wireless Technologies CablesControl Station Public Address MountingAccessories Receive Adjust the VolumeTurn the Radio On or Off Select a Radio ChannelSend a Selective Call Restore Channels to the Scan ListLED Indicators Audio Indicators for Programmable ButtonsRepeater mode/ talkarnd mode On/offRx/Tx Page Page 6881096C22