Motorola CM300TM manual VOX Operation, Program PL/DPL Codes

VOX OPERATION

When hands-free operation is desired, your radio can transmit by voice alone using the VOX feature when you speak through a voice activated external microphone that is connected to your radio.

Note: A voice activated external microphone must be connected to your radio prior to power-up of the radio in order to activate the VOX feature.

To enable or disable VOX operation on a channel, press the preprogrammed VOX button (see page 14).

Note: Pressing the PTT button disables VOX.

– or –

You can select channels to enable or disable VOX as preprogrammed by your dealer/ programmer.

1Gor Hto select a channel that has been preprogrammed to enable VOX.

Note: Pressing the PTT button disables VOX.

2Gor Hto select a channel that has not been preprogrammed to disable VOX.

PROGRAM PL/DPL CODES

Use this feature to edit the Private-Line/Digital Private-Line codes for a selected channel.

1Dto enter menu mode.

2	Gor Huntil	EDIT	PL
3	Dto select	EDIT	PL
4	Gor Huntil	RX	XXX.X
	– or – until	TX XXX.X

5Dto select the current setting.

6Gor Hto scroll through the standard TPL frequencies or DPL codes.

– or –

Enter a non-standard or standard 4-digit TPL frequency or the 3-digit octal code (numbers 0-7 only) for DPL via the DTMF microphone keypad.

7Dto confirm selection.

8Cuntil you exit menu mode.

21

GETTING STARTED

English