Motorola CM300TM Prioritize a Channel in a Scan List, Scanning Sequence, Set Priority Channels

PRIORITIZE A CHANNEL IN A SCAN LIST

You may want to check the activity on one or two channels more frequently than others. You can do this by prioritizing them:

Priority Channel	Scanning Sequence
None specified	Ch1➠Ch2➠Ch3➠
	Ch4➠…Ch1
Channel 2	Ch2➠Ch1➠Ch2➠Ch3➠
(Priority 1)	Ch2➠Ch4➠Ch2➠…Ch1
Channel 2	Ch2➠Ch1➠Ch8➠Ch3➠
(Priority 1) and	Ch2➠Ch4➠Ch8➠…Ch1
Channel 8
(Priority 2)

Note: If you are receiving on a non-priority channel and traffic becomes active on a priority channel, your radio will automat- ically switch to that priority channel and indicate the activity with a short tone.

Set Priority Channels

Note: You cannot have the same priority on two different channels.

1Dto enter menu mode.

2	Gor Huntil	PROG	LST
3	Dto select	PROG	LST
4	Gor Huntil	SCAN	LST
5	Dto select	SCAN	LST
6	Gor Huntil	EDIT	PRI
7	Dto select	EDIT	PRI
8	Gor Huntil	PRI	#1
	– or – until	PRI	#2

9Dto select the desired priority level. You see the current priority channel.

10Gor Huntil you see the channel you want to prioritize.

31

SCAN

English