Motorola CM300TM Turn the Radio On or Off, Adjust the Volume, Select a Radio Channel, Receive

Page 63

Turn the Radio On or Off

1.Rotate the On/Off/Volume Control knob clockwise. You will hear the self- test pass tone and see the green LED indicator and display icons light momentarily.

2.Rotate the On/Off/Volume Control knob counterclockwise until you hear a click and both the display and the LED indicators turn off.

Adjust the Volume

1.Turn the On/Off/Volume Control knob clockwise to increase the volume, or counterclockwise to decrease the volume.

Select a Radio Channel

1.Gor Hto select the desired channel.

Receive

1.Turn radio on and adjust volume to the desired level.

2.Select desired channel.

3.Listen for voice activity. The red LED indicator flashes while your radio is receiving.

Transmit

1.Hold the microphone vertically 1 to 2 inches (2.5 to 5 cm) from your mouth. Press the PTT button to talk. The red LED indicator lights steady while the call is being sent.

2.Release PTT button to listen.

Start or Stop System Scan

1.Press the preprogrammed Scan button to start scan. – OR – Gor Hto select a channel that contains a Scan list. From the Scan menu, select

SCAN ON. The green LED indictor blinks during scan operation.

2. Press the preprogramed Scan button again to stop scan. – OR – from the Scan menu, select SCAN OFF.

Start or Stop Auto Scan

1.Gor Hto select a channel that has been preprogrammed for Auto Scan by your dealer/programmer.

2.Gor Hto select a channel that has not been preprogrammed for Auto Scan by your dealer/programmer.

Delete a Nuisance Channel During Scanning

1.While radio is on a nuisance channel, hold down preprogrammed Nui- sance Delete button until you hear a tone.

2.Release Nuisance Delete button.

CM300™ Quick Reference Card

Record the functions for your radio’s programmable buttons in the table provided below. For further information, see page 12 of this User Guide.

Channel Selector	Red/Yellow/Green
Menu Scroll Buttons	LED Indicators
On/Off/Volume	Speaker
Knob	Display

PERS4

CM300

P1

P2

P3

P4

	Microphone		Menu Buttons	Programmable
	Microphone		(P1, P2)	Buttons (P1, P2, P3, P4))
	Jack		(P1, P2)	Buttons (P1, P2, P3, P4))
	Jack

	Button		Function	Short Press	Long Press	Hold Down	Page

Image 63

Contents CM300 Computer Software Copyrights Contents Phone User SettingsWarranty AccessoriesProduct Safety and RF Exposure Compliance SafetySafety Introduction CM300 Radio FeaturesRadio Wide Features Signaling FeaturesDtmf PTT ID Radio Overview PERS4Display LED IndicatorsOptional Enhanced Keypad Microphone RMN5029 Number of Times Button is Pressed Entering Characters Using the Dtmf Microphone KeypadIndicator Tones Programmable Buttons Phone Mode Enabled Option Board Disabled EscalertFunction Indicator Short Press Long Press Hold Down Button Programmable FeaturesVoice Operated Toggle VOX on and off. † Transmission Navigate the Menu Menu ButtonsMenu Button Menu Scroll ButtonsRadio Overview OFF Adjust the VolumeGetting Started Turn the Radio on or OFFOpen Squelch Monitor ReceiveMonitor Silent MonitorRepeater or Talkaround J Mode Select either Repeater Mode or Talkaround ModeTransmit To Activate Home Revert Memory Channel SET Local or Distance ModeHome Revert Memory Channel 1 Store Memory Channel 1Program PL/DPL Codes VOX OperationGetting Started Send a Selective Call Radio CallsSelective Radio Inhibit Receive a Selective Call FSend a Call Alert Receive a Call Alert page FUse with Enhanced Keypad Microphone RMN5029 Repeater AccessEmergency Alerts E Send AN Emergency Alert EClear AN Emergency Alert Scan TalkbackStart System Scan G Stop System Scan Start Auto Scan GStop Auto Scan Restore Channels to the Scan List Delete a Nuisance ChannelEdit a Scan List Delete ADD or Delete Channels in a Scan ListPriority Channel Prioritize a Channel in a Scan ListScanning Sequence Set Priority ChannelsSaved Receive a Phone Call D PhoneMake a Phone Call D Xxxxxxx Add an Entry Edit the Phone ListLOC Delete an EntryEdit an Entry Edit Access/Deaccess CodesPHN Phone Tone Preferences Tone PreferencesFeature What it Does Settings Tone SettingsKeypad ON/OFF Tones Tones ON/OFFEscalert Call Tone TaggingOFF Tone Preferences User Settings Utilities Features SET Squelch Level SET Power Level BSET the Backlight Intensity Option Board ON/OFF aDisplay the Software Version User Settings Limited Warranty Motorola Communication Products WarrantyWarranty II. General Provisions What this Warranty does not Cover VII. Governing LAW Audio AccessoriesAlarm and Accessories AntennasData CES Wireless Technologies CablesControl Station Public Address MountingAccessories Receive Adjust the VolumeTurn the Radio On or Off Select a Radio ChannelSend a Selective Call Restore Channels to the Scan ListLED Indicators Audio Indicators for Programmable ButtonsRepeater mode/ talkarnd mode On/offRx/Tx Page Page 6881096C22