Motorola CM300TM manual Radio Calls, Selective Radio Inhibit, Receive a Selective Call F

RADIO CALLS

SELECTIVE RADIO INHIBIT

Your radio is equipped with a security feature that can temporarily render the unit inoperative when an inhibit signal is sent from the base station.

This feature is commonly used to disable radios:

•In case of theft

•When your vehicle is being serviced

•For system control reasons

When your radio has been rendered inoperative by the base station, all controls will be inoperative except for the On/Off/Volume knob and the display shows INHIBIT.

RECEIVE A SELECTIVE CALL F

When you receive a Selective Call:

•The display shows F and the prepro- grammed name or ID of the calling radio.

•The yellow LED indicator flashes, if pro- grammed by your dealer/programmer.

•You hear two high-pitched tones.

1To acknowledge the call, press and release the PTT button.

2Press and hold the PTT button to talk; release to listen.

SEND A SELECTIVE CALL

You can send a Selective Call to a particular radio or to a group of radios, as programmed by your dealer/programmer.

Press the preprogrammed Radio Call button (see page 14), and proceed to step 4.

– or –

1Dto enter menu mode

23

RADIO CALLS

English