Charging the V12 headset

The battery status is indicated below the battery icon. When the percentage is below 20%, the battery of the headset is low. Charge the unit.

1.Connect the charger’s plug into the Charger Input(1) of the V12. Connect the charger to an external power source.The LCD(4) displays CHARGING and the % battery level.

2.When the battery status reaches 100%,

the battery is full.

3. Unplug the charger.

Wearing the V12 on your ear

The Ear Hook(2) is reversible. Gently pull it out from its holder, reverse the position and then secure it back into its holder. Wear it on either ear.

Wearing the V12 around your neck

The V12 can be worn around your neck attached to the included Lanyard for easy viewing of the LCD screen. Place the Lanyard around your neck and plug the micro-usb adapter end into the Charge port of the V12. Though you will not hear a ring tone from the V12 at that distance from your ear, you will feel the Vibrating Alert and hear your phone ring… (Note: not all phones will give a ring tone when a Bluetooth device is connected)

On an incoming call, check the Caller ID and if you want to answer pull the V12 off the Lanyard and slip on to your ear.