Sherwood R-765 When CD, VIDEO 1~3 is selected as an, input source, To listen with the headphones

When CD, VIDEO 1~3 is selected as an			7	To compensate for edgy or shrill movie
input source				sound tracks.
4	Select the digital or analog input			CINEMA EQ
	connected as desired.
		DIGITAL
		INPUTS

				• Then “C-EQ OFF” is scrolled.
• Each time this button is pressed, the corresponding				• Press it again to work, the “C-EQ ON” is scrolled.
input is selected as follows ;				• When 96 kHz PCM(2 CH stereo) signals are input,
	A(nalog) c(oaxial) 1 c(oaxial) 2			the cinema EQ function does not work.
		o(ptical) 2	o(ptical) 1
• To listen to a DTS or Dolby Digital program source				8	To mute the sound.
in the 2-CH downmix mode, in the stereo mode, the
corresponding digital input should be selected. (For
details, refer to “Downmixing into 2 front channels”
on page 31.)					T/V
Notes :					MUTE

•When the selected optical or coaxial digital input is not connected, the “DIGITAL” indicator flickers, meaning no sound. (Refer to “ENJOYING SURROUND SOUND” on page 27.)

• The sound from the component connected to the		• “MUTE” will flicker.
selected digital input can be heard regardless of the		• To resume the previous sound level, press it again.
selected input source.
5	Operate the selected component for	9	To listen with the headphones.
	playback.
			PHONES

• When playing back the program sources with surround sound, refer to “ENJOYING SURROUND SOUND” on page 27.

6		Adjust the (overall) volume.	• Ensure that the SPEAKER button is set to off.
			• When listening to a DTS or Dolby Digital program
			source, if the headphones are plugged and the
	MASTER VOLUME		SPEAKER button is set to off, it enters the 2-CH
		VOLUME	downmix mode automatically. (For details, refer to
		T/V	“Downmixing into 2 front channels”on page 31.)
		or
DOWN		UP

20

ENGLISH