Sherwood R-765 manual Manual tuning, Presetting radio stations

LISTENING TO RADIO BROADCASTS
Auto tuning						2	Select the desired band.
1	Select the tuner.						BAND
								MHz
	INPUT SELECTOR
AUDIO							BAND	FREQUENCY
						TUNER
		1	2	3	4	• Each time this button is pressed, the band is changed
	or	5	6	7	8	to FM or AM.
		9	0	+10		• When pressing the BAND button without selecting
						the TUNER, the tuner will be selected automatically.

3	Select the tuning mode.	4	Press the TUNING(/PRESET) UP(		)
	T/P MODE		second.or DOWN(	) button for more than 0.5
		TUNING/PRESET
			or		TUNE +
					TUNE -
• Each time this button is pressed, the mode changes		• The tuner will now search until a station of sufficient
as follows;		strength has been found. The display shows the tuned
	Tuning mode : “PRESET” goes off.	frequency and “TUNED”.
		• If the station found is not the desired one, simply
	Preset mode : “PRESET” lights up.
		repeat this operation.
		• Weak stations are skipped during auto tuning.
		• When pressing the TUNE +/- buttons on the remote
		control, you need not select the tuning mode on step 3.

Manual tuning
• Manual tuning is useful when you already know the			TUNING/PRESET
frequency of the desired station.				or	TUNE +
• Perform the steps 1 to 3 in “Auto tuning” procedure and					TUNE -
press the TUNING(/PRESET) UP(		) or DOWN(	)
button repeatedly until the right frequency has been
reached.
Presetting radio stations			2	Press the MEMORY/ENTER button.
• You can store up to 30 preferred stations in the
memory.
	Tune in the desired station with auto or		MEMO/ENTER
1					ENTER
	manual tuning.
				or
			• “MEM” is flickering for 5 seconds.

32