Xerox 8830 Preset Reduction/Enlargement, Select, 100.0%, Manual Reduction/Enlargement, ENTER 25.0

NOTE: If the indicator lamp is already lit, press the key once to display the screen.

MANUAL REDUCTION/ENLARGEMENT

ENTER (25.0 – 400.0):

100.0%

2.Enter a reduction/enlargement between 25 and 400. You can select any value between these limits in 0.1% increments.

3.Press the Enter key to confirm your choice and return to the READY screen. The READY screen now displays the new reduction/enlargement percentage.

NOTE: Pressing the Exit key rejects the choice and retains the previous setting.

Preset

Preset (factory default) allows you to select a predefined reduction or enlargement percentage.

To select the Preset mode:

1.Press the key under Reduce/Enlarge until the Preset indicator lamp illuminates. The PRESET REDUCTION/ENLARGEMENT screen is displayed.

NOTE: If the indicator lamp is already lit, press the key once to display the screen.

PRESET REDUCTION/ENLARGEMENT

SELECT:

100.0%

2.Press the Previous or Next key until the desired reduction/enlargement ratio is displayed. The possible choices are any combination of the following:

∙50%, 100% (default), and 200%

∙65% and 129%, if the ANSI and ARCH sizes are enabled

∙71% and 141%, if the ISO A, ISO B or JIS B sizes are enabled

∙Up to six additional preset values, if these values have been defined using the CUSTOM R/E Presets menu function.

20 ∙Getting to know the WIDE FORMAT COPY SYSTEM XEROX WIDE FORMAT COPY SYSTEM