Xerox X2 Finisher key, Finisher Fold Program Title Block Location, During Sets Build Operation

Finisher key

A finishing device, such as a folder, can be connected to the WIDE FORMAT COPY SYSTEM If such a device is connected, the Finisher key enables or disables that device.

To enable/disable a finishing device:

1.Press the Finisher key. The Finisher indicator lamp illuminates and the FINISHER menu screen are displayed. The black arrows indicate that the menu contains more options than are visible. The selected option is highlighted.

FINISHER

FOLD PROGRAM

TITLE BLOCK LOCATION

OUTPUT BIN

OVERLENGTH OPTION

TAB OPTIONS

NOTE: If no finishing device is connected, pressing the Finisher key produces the error message shown below.

FINISHER

FINISHER OPTION

IS NOT AVAILABLE

When a set is being built, the finisher options cannot be changed and pressing the Finisher key is invalid. The error screen shown below is displayed. Enable the finisher and select the finisher options either before selecting the Sets Build option or after the set has been built.

FINISHER

FINISHER OPTION CANNOT BE CHANGED

DURING SETS BUILD OPERATION

For either error screen, press the Exit key to return to the READY screen. The Finisher indicator lamp is extinguished

2.Press the Previous or Next key to scroll through the list of options.

3.When the desired option is highlighted, press the Enter key to select the option. The screen for the selected option is displayed. See Finisher menu options below and on the next

XEROX WIDE FORMAT COPY SYSTEM Special features keys ∙ 65