Xerox 8830, 8825, 8850, X2 manual Usage Meters

USAGE METERS

CLEAR SCANNER USAGE

Select the USAGE METERS option of the DIAGNOSTICS menu to view the total system usage for documents scanned and media printed.

To view area and media usage:

1.Press the Menu key. The MAIN MENU screen is displayed.

2.Press the Next key until DIAGNOSTICS is highlighted.

3.Press the Enter key to select DIAGNOSTICS. The DIAGNOSTICS menu screen is displayed.

4.Press the Enter key to select USAGE METERS. The USAGE METERS screen is displayed.

The USAGE METERS screen provides Scanner area usage and media usage. Scanner area usage is measured in square units. Media usage is measured in both linear and square units. Units are displayed as either feet or meters depending on the display units selected for the Scanner. Refer to "Localization" in the "Main Menu" section for complete information about setting the display units.

Below is an example of the USAGE METERS screen. In the example, the units are displayed as meters.

	USAGE METERS
SCANNER (F2):	11
MEDIA LINEAR	307
MEDIA AREA	670

5.When finished viewing the usage information, press the Exit key to return to the DIAGNOSTICS menu screen.

The CLEAR SCANNER USAGE option of the DIAGNOSTICS menu is for use by the Customer Service Engineer only. It requires the entry of the diagnostic password. It allows the Customer Service Engineer to reset to zero the usage value for documents scanned.

If you select this option, the CLEAR SCANNER USAGE screen is displayed. You cannot perform any functions in this screen. Press the Exit key to return to the DIAGNOSTICS menu screen.

Below is an example of the USAGE METERS screen. In the example, the units are displayed as square feet.

CLEAR SCANNER USAGE

SCANNER (F2) :	1234
ARE YOU SURE?:	NO

116 ∙Main Menu XEROX WIDE FORMAT COPY SYSTEM