Xerox X2, 8825, 8850, 8830 manual Scanning to the Network SCAN mode

Scanning to the Network (SCAN mode)

Scanning to the Network (SCAN mode)

The WIDE FORMAT COPY SYSTEM has two scanning modes of operation: COPY mode and SCAN mode.

NOTE: The SCAN mode is optional on the XEROX WIDE FORMAT COPY SYSTEM 8825. X2 TECH Color Scan-to-Net is an available option for all XEROX WIDE FORMAT COPY SYSTEM equipped with the WIDE FORMAT SCAN SYSTEM. The Color Scan-to-Net feature requires a separately purchased, Color Enablement feature key. Scanned color files may be printed in color on the X2 TECH printer. For ordering information, contact your XEROX representative.

NOTE: The COPY mode will be disabled and the READY TO COPY screen will not be accessible when the SCAN OPTION (COLOR) is enabled and a color printer is connected to the Controller.

∙In COPY mode, documents are scanned and temporarily stored in memory or on the controller internal hard disk, and then sent to the local Printer as soon as the Printer is available. When the next job is scanned, the file from the previous job is automatically deleted from the hard disk, making room for new files. Operation of the system works as described in the previous sections.

∙In SCAN mode, the image file created by scanning is stored directly on the controller hard disk for later retrieval over a connected network by a remote system. The image is stored in Tagged Image File Format (TIFF) 6.0 using CCITT Group 4, CALS compression, Packbits, or PDF. High resolution JP G files are also available with the Color Scan-to-Net option.

Files stored in SCAN mode can be retrieved over the network. After the AccXES Client Tools program running on a network-connected computer retrieves the file, the image residing on the local hard disk is deleted

XEROX WIDE FORMAT COPY SYSTEM Scanning to the Network (SCAN mode) ∙ 81