Xerox 8825, 8850, 8830, X2 manual Ready To Build Set Insert Document, Memory

2.Press the Previous or the Next key to select FORWARD or REVERSE collation.

∙FORWARD prints the collated set in the order that the sheets were scanned. Page 1 will be on the top.

3 2 1

SCANNED

3 2 1

PRINTED

∙REVERSE prints the set in the reverse order that they were scanned. Page 1 will be on the bottom.

3 2 1

SCANNED

1 2 3

PRINTED

3.Press the Enter key to confirm your choice. The READY TO BUILD SET screen is displayed.

READY TO BUILD SET

INSERT DOCUMENT: 1

AUTO	100.0 MEMORY
	%

4.Insert each document of the set one at a time into the Scanner as prompted by the display. As the documents are scanned, the amount of memory used is shown in the rectangular graphical display.

NOTE: You can select reduction/enlargement and copy quality settings for each sheet prior to scanning that sheet.

5.When the set is completely scanned, press the Sets Build key again. The Sets Build indicator lamp is extinguished when the Start key is pressed then the READY TO PRINT SET screen is displayed.

READY TO PRINT SET

PRESS START TO PRINT

100.0

3

6.If desired, you can now make further changes to the Media Selection, Source selection and the Reduction/Enlargement value. Any such change will be applied to that printing of the entire set.

70 ∙Special features keys XEROX WIDE FORMAT COPY SYSTEM