Xerox X2, 8825, 8850, 8830 manual Component Tests, Motor Speed, Lead Edge/Trail Edge Sensors

∙LAMP - Enables you to turn the lamp on and off and receive a feedback from the illumination sensor.

∙CALIBRATION MOTOR - Enables you to test the calibration zone motor.

To access the COMPONENT TESTS menu:

1.Press the Menu key. The MAIN MENU screen is displayed.

2.Press the Next key until DIAGNOSTICS is highlighted.

3.Press the Enter key to select DIAGNOSTICS. The DIAGNOSTICS menu screen is displayed.

4.Press the Next key until SCANNER DIAGNOSTICS is highlighted.

5.Press the Enter key to highlight SCANNER DIAGNOSTICS. The SCANNER DIAGNOSTICS menu screen is displayed.

6.Press the Next key until COMPONENT TESTS is highlighted.

7.Press the Enter key to select COMPONENT TESTS. The COMPONENT TESTS menu screen is displayed. The black arrows indicate that the menu contains more options than are visible. The selected option is highlighted.

COMPONENT TESTS

MOTOR SPEED

LEAD EDGE/TRAIL EDGE

SENSORS

MOTOR SPEED

8.Press the Previous or Next key to scroll through the list of options.

9.When the desired option is highlighted, press the Enter key to select the option. The screen for the selected option is displayed.

The MOTOR SPEED option is for use by the Customer Service Engineer only and requires the entry of the diagnostic password. It allows the Customer Service Engineer to adjust the Scanner motor speed and correct magnification error in the process direction.

If you select this option, the MOTOR SPEED screen is displayed. You cannot perform any functions in this screen. Press the Exit key to return to the COMPONENTS TESTS menu screen.

Below is an example of the MOTOR SPEED screen.

XEROX WIDE FORMAT COPY SYSTEM Main Menu ∙ 125