Xerox 8850, 8825, 8830 Set Original, Type to, Background Suppression to Off, Line and Background

The image density on the	Rotate the original 90 degrees.	Adjust the Copy
copy varies from light to		setting for best image
dark.		quality.
Copies made in Photo	Set the Original, Type to Normal and the	Set Original, Type to	Try a lighter
mode have geometric	Background Suppression to Off.	Line and Background	Contrast
patterns.		Suppression off.	setting.
Fine lines on the original do	Enable the LINE MODE LINE	Adjust the Copy
not appear on the copy	PRESERVATION option. See "Imaging"	setting for best image
when the image size is	in the "Main Menu" section for more	quality.
reduced.	information.
Gray areas appear in the	Refold the document in the reverse
copy at the location of	direction to flatten the creases or folds.
creas es or folds in the
original document.
Error messages
An error message is	Locate the message in Table 8, "Error
displayed on the Scanner	messages," in this s ection and perform
Control Panel.	the corrective action indicated.

	Table 8. Error Code Table
Error message	Probable cause	Corrective action
40000001: ERROR	The Job Log File size has	Contact your System Administrator
ACCOUNTING DISK FULL	reached the maximum space
	allocated for it
40000002: ERROR	The number of Job Records in	Contact your System Administrator
	the Job Log File has reached the
	maximum as defined by the
	AccXES Account Management
	Tool
CONTROLLER FAULT -	The Controller has developed a	Remove document. Press Start to print the
50000001	"memory is full" internal fault.	job
	Large documents using Auto
	Reduction/Enlargement or Auto-
	Rotate may cause this fault.
	Also, Photo and Mixed/Custom
	modes require significantly more
	memory than Line mode.
	The Controller has developed a	Remove the document. Wait for previous
CONTROLLER FAULT -	“memory is full” internal fault.	scans to finish printing. End the current set
	Large documents using Auto	or print it if a set is in progress. Rescan the
50000002
	Reduction/Enlargement or Auto	document.
	Rotate may cause this fault. Also,
	Photo and Mixed/Custom modes
	require significantly more memory
	than Line mode.
CONTROLLER FAULT -	A task controlling the scanner	Power off the System. .
50000003	received and unrecognized	Check that all cables are connected
	request from the task controlling
CONTROLLER FAULT -		correctly.
	the scanner control panel.
50000004		Power on the System.
CONTROLLER FAULT -
		See the "Powering off the System" and
50000005
		"Powering on the System" sections for more
		information.

XEROX WIDE FORMAT COPY SYSTEM Problem solving ∙ 143