Xerox 8825, 8850 Sample Mode Press Start To Accept Page, Press C/Ca To Reject, Scan Mode Sample

and the Printer Interrupt indicator lamp illuminates. The Printer immediately prints a sample of the next image inserted into the Scanner. The SAMPLE MODE screen is displayed.

SAMPLE MODE

PRESS START TO ACCEPT PAGE.

PRESS C/CA TO REJECT.

2.Do one of the following:

Scan Mode Sample:

∙Press the Start key to print the complete image as a full-size copy.

∙Press the C/CA key to delete the scanned image.

3.Press the Sample key again to disable the Sample feature. The Printer is returned to the default priority setting and the Sample and Printer Interrupt indicator lamps are extinguished.

The best sample prints will be produced if the image enhancement features have been enabled. Refer to the Image Quality section for more information.

In order to have the selections indicated below in the SAMPLE MODE screen, the Scan-to-Net feature key must be installed to get SCAN IMAGE TO FILE, and the Scan-to-Print Feature key must be installed to get SCAN IMAGE TO PRINTER. The Scan-to Print feature is useful on the X2 TECH that does not have a COPY Mode. However it is convenient on the other WIDE FORMAT COPY SYSTEMS to be able to make a sample before scanning an image to file.

To print a sample copy, perform the following:

1.If the scanner is set to COPY mode switch to SCAN mode for instructions, refer to “Switching between COPY mode and SCAN mode”

2.Enter the Directory name.

3.Press the Sample special function key. The SAMPLE MODE screen is displayed.

SAMPLE MODE

4 SCAN IMAGE TO FILE SCAN IMAGE TO PRINTER

4.Press the Next key to highlight SCAN IMAGE TO PRINTER.

NOTE: The SCAN IMAGE TO FILE and SCAN IMAGE TO PRINTER options can be individually or simultaneously selected. However, you cannot deselect both options

78 ∙Special features keys XEROX WIDE FORMAT COPY SYSTEM