Xerox X2, 8825, 8850, 8830 manual E. Standard Organizer

E. Standard Organizer

The Organizer is located on the front of the Scanner. It is useful for holding multiple documents that are to be scanned. It has two extensions at its end that can be pulled out to accommodate longer documents (up to size E or A0).

F Document Feed Tray

Insert documents to be scanned face down and centered into the

Document Feed Tray.

F. Productivity Document Feed Tray

Provides built-in Document Width Sensors that eliminate the need to prescan document to do width measurement. This increases the document throughput resulting in higher productivity with a WIDE FORMAT COPY SYSTEM. This option is only available on the newer

WIDE FORMAT SCAN SYSTEM.

.

Rear View

A: Standard Stacker	D: Power Cord and Connector
B: Document Exit Slot	E: Status Indicator LED
C: Power On/Off switch	F: IEEE 1394 Cable and Connector

NOTE: Components shown above with the exception of the Standard

Organizer are also available on all WIDE FORMAT SCAN SYSTEMs

XEROX WIDE FORMAT COPY SYSTEM Getting to know the WIDE FORMAT COPY SYSTEM ∙ 5