Xerox 8830, 8825, 8850, X2 manual Transform key, Transform Menu, Margins, Justification Transform

Transform key

The Transform feature contains the following menu choices:

∙MARGINS - Allows you to adjust the dimensions of the margins around the image. By entering positive margins, blank space is inserted around the image. By entering negative values, unwanted parts of the image can be cropped.

∙JUSTIFICATION - Allows you to adjust the position of the image on the media.

∙TRANSFORM - Allows you to request transformation of the scanned image into a mirror image, a negative photographic inversion, or both.

NOTE: The image can also be rotated. Refer to "Imaging" in the "Copy

Options" section for further information about image rotation.

To access the TRANSFORM MENU:

1.Press the Transform key. The TRANSFORM MENU screen is displayed. The selected option is highlighted.

TRANSFORM MENU

MARGINS

JUSTIFICATION

TRANSFORM

2.Press the Previous or Next key to highlight the desired option.

3.Press the Enter key to select the highlighted option. The screen for the selected option is displayed.

Margins	The MARGINS option of the TRANSFORM MENU allows you to select
	the dimensions for the margins that surround an image. These margins
	are referred to as the lead, left, right and trail edges.
	NOTE: Margins can only be adjusted when the WIDE FORMAT COPY
	SYSTEM is in the COPY mode.
	The example below illustrates an image entering the Scanner and the
	orientation of the image margins.

Scanner

Lead

edge

Right image

Trail

Left image

72 ∙Special features keys XEROX WIDE FORMAT COPY SYSTEM