Xerox 8850, 8825, 8830, X2 manual Reduce/Enlarge, Auto, Manual

Reduce/Enlarge	The Reduce/Enlarge area of the Scanner Control Panel allows you to
	select one of three reduction/enlargement modes - Auto, Manual, and
	Preset. The illustration below depicts the Reduce/Enlarge portion of the
	Control Panel.
	NOTE: Reduce/Enlarge can only be selected in Copy mode.

Auto

Auto automatically adjusts the reduction/enlargement to fit the size of media selected. To select the Auto mode, press the key beneath Reduce/Enlarge until the Auto indicator lamp illuminates.

NOTE: The size of the output media must be known in advance for this feature to operate. Therefore, Auto is not a valid selection if both the Synchro cut option and the Sheet and Auto media source options are selected. If you select this combination, an INVALID AUTO COMBINATION status is displayed.

Manual

Manual allows you to reduce the image captured by the Scanner to as little as 25% or as much as 400% of the original size before the copy is printed.

To select the Manual mode:

1.Press the key beneath Reduce/Enlarge until the Manual indicator lamp illuminates. The MANUAL REDUCTION/ENLARGEMENT screen is displayed.

XEROX WIDE FORMAT COPY SYSTEM Getting to know the WIDE FORMAT COPY SYSTEM ∙ 19