Xerox 8850, 8825, 8830, X2 manual Scan Bar, Calibration Test, Press Start To Begin, Full System Test

SCAN BAR	Select the SCAN BAR option to calibrate the response of the scan bar.
	To run the SCAN BAR diagnostic:
	1.	Press the Menu key. The MAIN MENU screen is displayed.
	2.	Press the Next key until DIAGNOSTICS is highlighted.
	3.	Press the Enter key to select DIAGNOSTICS. The
		DIAGNOSTICS menu screen is displayed.
	4.	Press the Next key until SCANNER DIAGNOSTICS is displayed.
	5.	Press the Enter key to select SCANNER DIAGNOSTICS. The
		SCANNER DIAGNOSTICS menu screen is displayed.
	6.	Press the Next key to highlight SCAN BAR.
	7.	Press the Enter key to select SCAN BAR. The SCAN BAR
		screen is displayed.
		SCAN BAR
		CALIBRATION TEST

PRESS START TO BEGIN

	8.	Press the Start key to begin the test. While the test is executing,
		the bottom display line changes to "RUNNING."
	At the completion of the test, the test result is displayed. A test result
	with no failure displays as PASSED. A test result with a failure displays
	as FAILED followed by ERROR CODE: and a hexadecimal value
	between 0 and FF. If a failure code is displayed, call for service.
	9.	Press the Exit key to return to the SCANNER DIAGNOSTICS
		menu screen.
FULL SYSTEM TEST	Select the FULL SYSTEM TEST option to run all applicable tests on the
	Scanner to determine if it is working properly.
	To run the FULL SYSTEM TEST diagnostic:
	1.	Press the Menu key. The MAIN MENU screen is displayed.
	2.	Press the Next key until DIAGNOSTICS is highlighted.
	3.	Press the Enter key to select DIAGNOSTICS. The
		DIAGNOSTICS menu screen is displayed.
	4.	Press the Next key until SCANNER DIAGNOSTICS is displayed.
	5.	Press the Enter key to select SCANNER DIAGNOSTICS. The
		SCANNER DIAGNOSTICS menu screen is displayed.
	6.	Press the Next key until FULL SYSTEM TEST is highlighted.
	7.	Press the Enter key to select FULL SYSTEM TEST. The FULL
		SYSTEM TEST screen is displayed.
XEROX WIDE FORMAT COPY SYSTEM		Main Menu ∙ 119