Xerox 8850, 8825, 8830 Template Is In Use Press Enter To Continue, Exit To Abort, Delete Template

NOTE: You can replace the contents of a used location with the current job settings information. If you choose a location that already contains information, the TEMPLATE IS IN USE screen is displayed as shown below. Press the Enter key to overwrite the contents. Press the Exit key to cancel the operation.

TEMPLATE IS IN USE

PRESS ENTER TO CONTINUE

EXIT TO ABORT

	8.	Press the Enter key to return to the READY screen.
Deleting Job Templates	Use the DELETE TEMPLATE option to delete previously saved
	templates. Doing so leaves the template location blank and available to
	use again. Once a template has been deleted, it cannot be recalled.
	To delete a saved template:
	1.	Press the Store/Recall key. The STORE/RECALL menu screen
		is displayed.
	2.	Press the Next key to highlight JOB TEMPLATES.
	3.	Press the Enter key to select JOB TEMPLATES. The JOB
		TEMPLATES menu screen is displayed.
	4.	Press the Next key until DELETE TEMPLATE is highlighted.
	5.	Press the Enter key to select DELETE TEMPLATE. The
		DELETE TEMPLATE screen is displayed. This screen indicates
		the locations for the templates currently in use. Locations that
		do not contain a template are not shown.
	Below is an example of the DELETE TEMPLATE screen.
		DELETE TEMPLATE
	TEMPLATES IN USE: 1 2 3 4 5

ENTER TEMPLATE NUMBER:

0

6.Use the numeric keypad to enter the location of the template to be deleted, then press the Enter key. The deleted location is removed from the list in the DELETE TEMPLATE screen and the contents of that location are deleted.

You can now select other locations to be deleted in the same way.

7.If no more locations are to be deleted, press the Exit key to return to the READY screen.

XEROX WIDE FORMAT COPY SYSTEM Special features keys ∙ 63