Listening to radio, Preset channels, Viewing content

Listening to radio

Note that the quality of the radio broadcast depends on the coverage of the radio station.

To switch the radio on or off, connect a compatible

headset to the smartphone and tap in Visual Radio.

Tip: You can also control the radio from the menu.

Press , select Radio and an appropriate menu command.

To listen to the radio through the headset or loudspeaker, make sure that the headset is connected

to the smartphone, press , and select Tools > Speaker in use > Headset or Loudspeaker. The lead of the headset functions as the radio antenna, so let it hang freely.

To adjust the volume, tap and drag , or press and .

To tune radio channels manually, tap or .

To search for channels automatically, tap or

. Searching stops when a channel is found.

To view available channels based on location, press

, and select Tools > Channel directory.... Select a location and radio station. Visual Radio tunes to that station automatically. To save the channel to a list of preset channels, tap Save. See “Preset channels” on page 95 for details. To view station details, such as the visual service ID, tap Details.

To switch to stereo or mono output mode, press

and select Tools > Sound > Stereo or Mono.

Viewing content

To view available visual content, select the preset channel, and tap . To stop viewing visual content, tap . Note that you must have the correct visual service ID defined and have Visual Radio service enabled. See “Preset channels” below for details.

Preset channels

You can save up to 20 radio channels to Visual Radio.

To save a channel, tap and to tune in to a

station. Press , and select Channel > Save.... Select a channel slot and write a name for the preset channel. Change the frequency, if necessary. If the station provides visual content, add the Visual Radio service ID, and select the Enable visual service: check box to allow for visual content.