Sherwood R-765 manual Calling the memorized levels, Downmixing into 2 front channels

Calling the memorized levels
1 Press the CHANNEL SELECTOR button.		• “REF.1” (or “USER”, etc.) is displayed for
CHANNEL		several seconds.
SELECTOR
	CH.SEL	• If the channel level mode display disappears,
		press the CHANNEL SELECTOR button
T/V
or		again.

2 Select the desired one between REF.1 and REF.2
ADJUST	• Then the current channel levels are changed to
	the memorized ones.
CH/LEVEL
T/V
or

	Downmixing into 2 front channels
	• Allows the multi - channel DTS or Dolby Digital								• To cancel the 2 - CH downmix mode, select the
	signal to be reproduced through only two speakers or								desired surround mode with the DSP MODE (<) or
	through headphones.								(>) button.
	• When the digital signals from the DTS or Dolby								• When the playback of the source on the player is
	Digital program sources are input in available								stopped, interrupted, etc., the 2 - CH downmix mode
	surround mode, press the STEREO button.								is not canceled even though “ ST” and the DTS or
									Dolby Digital indicators go off.
UND MODE									• If headphones are plugged in and the SPEAKER
		STEREO							button is set to off while the digital signals from the
								STEREO	DTS or Dolby Digital program sources are being
									input, it will enter the 2-CH downmix mode
			or
									automatically and if the headphones are unplugged
				1	2	3	4		and the SPEAKER button is set to on in the 2-CH
				5	6	7	8		downmix mode, it will return to the previous mode.
				9	0	+10

•“ST” indicator lights up and “2 CH DOWNMIX” is scrolled, meaning it enters the 2-CH downmix mode, and then the discrete multi-channels(except LFE) are mixed down into 2 front channels.

31