GE 2-9892 manual Remote Operation, To Play Messages from a remote location, To Replay Messages

REMOTE OPERATION

When you call your Answer-PhoneTMfrom another location using			•	A. Introduction
a touch-tone phone, you must enter your three digit security			•
code. (This code is factory preset and written on the bottom of			•
the unit.) You then can listen to your messages or enter a			•
command to request one of the other features normally available			•
to you at home. For future reference write your three digit			•
security code in the spaces provided on your remote card found			•
in the fold out in this book.
			•
Notes: Remote functions will not work with rotary, or push button
			•
pulse dialing phones.			•
After a remote command is completed you will hear three short
			•
beeps. You have ten seconds to enter a new command or hang
			•
up.
			•
You can press any key from a touch tone phone while the			•	B. Outgoing
outgoing message is playing to bypass the announcement. The			•	Announce-
unit plays a melody then a transfer tone when bypassed. You			•	ment (OGA)
may leave a message or dial the three digit security code to			•	Bypass
enter remote operations.			•
To Play Messages from a remote location			•	C. Remote
			•
1. Dial phone number of Answer-PhoneTM.			•	Message
	•	After (OGA) unit will play a melody followed by a beep.	•	Playback
2. Dial three digit security code after beep.
			•
	• Unit will beep once and voice will say “PLEASE WAIT” then
			•
		unit will rewind to the beginning of the messages and play	•
		them back.
			•
3. Unit will beep three times when finished.
			•
4. You will have ten seconds to enter another remote command
			•
	or hang up.
			•
To Replay Messages
			•
1. Press 2 to replay messages.
			•
2.	Unit rewinds tape.
			•
3.	Unit will play messages.		•
	•	Press 2 again while unit is playing to quit playback.	•
	•	Press 1 and hold to rewind, release to continue.	•
	• Press 9 to fast forward, release to continue.		•
4.	Unit will beep three times when finished.		•
			•

22