System setup
NOTE: For optimal recording, place the handset microphone nine inches away from the source that you wish to record.
Ringers
Ringer for HOME Ringer for CELL 1 Ringer for CELL 2 Record New Ringer
Record New Ringer
Press RECORD
to start recording Remaining record time 0:14
RECORD
Record New Ringer
Recording...
STOP
Record New Ringer
Recording Complete
Press SAVE
to save recording or PLAY to review
SAVEPLAY
Record New Ringer
Each recordable ringer can be up to 14 seconds. Depending on the remaining record time, you can record multiple ringers. To increase the record time, you need to delete a ringer melody (see page 37).
To record a ringer:
1.Press MENU/SELECT in idle mode to enter the main menu.
2.Press the UP and DOWN Navkeys to select Ringers, then press MENU/SELECT to enter the Ringers menu.
3.Press the UP and DOWN NavKeys to highlight Record New Ringer, then press MENU/SELECT.
4.Press the RECORD softkey to begin recording. Record Ringer after tone will be shown on the display, then you will hear tone.
5.Record your ringer melody, then press the STOP softkey.
6.When you are finished recording you can:
•PLAY - press the PLAY softkey to review the recorded ringer.
•SAVE - press to the SAVE softkey to save the recorded ringer.
•Press OFF/CANCEL to discard the new recording and exit to the Record New Ringer menu.
If you save the ringer, you will be prompted to enter a name for the recorded ringer.
•Use the character chart (page 68) to enter the ringer name (up to 10 characters), then press the SAVE softkey to save your recorded ringer.
Your new recorded ringer will appear in the Ringer Melody list (page 37).
38