System setup
Main Menu
Directory
Call Log
Answering System
Select
Answering System
Answer On/Off
Announcement
Record Memo
select
Answer On/Off OnOff
Set
Answer On/Off
By default, the answering system is on. When the answering system is off, ANS. OFF appears on the telephone base display. This means that incoming calls will not be answered by the answering system. However when the answering system is off, you can still play recorded messages (page 86) or record a memo (page 89).
To turn the answering system on or off:
1. Press the MENU softkey on the telephone base to enter the main menu.
2.Press the UP and DOWN NavKeys to highlight Answering System, then press the SELECT softkey.
3 Press the SELECT softkey to select Answer On/Off.
4.Press the UP and DOWN NavKeys to highlight On or Off, then press the SET softkey to save your selection.
NOTE: When the answering system is off, the answering system will answer the incoming call after 10 rings and then prompt the user to enter the remote access code (page 90).
50