AT&T 2455 If you hear noise or interference when using the phone, If your telephone misdials

Page 36

IN CASE OF DIFFICULTY

If you hear noise or interference when using the phone:

•You may be out of range. Move closer to the base.

•Household appliances plugged into the same circuit as the base can sometimes cause interference. Try moving the appliance or the base to another outlet.

•The layout of your home or office may be limiting the operating range. Try moving the base to another location, preferably on an upper floor.

If the phone does not ring when you receive a call:

•Make sure the Ringer is on.

•Make sure the telephone line cord is connected firmly to the base and the telephone jack.

•Make sure the AC adapter is plugged firmly into an electrical outlet not controlled by a wall switch.

•You might be too far from the base; move closer.

•You might have too many extension phones on your telephone line to allow all of them to ring. Try unplugging some of them.

If your telephone misdials:

•If you have dial pulse (rotary) service, you’ll need to set the Dial Mode switch to PULSE. Follow the instructions in the INSTALLATION section of this manual.

•If you have touch tone service and you hear clicks while you are dialing, you’ll need to set the Dial Mode to TONE. Follow the instructions in the INSTALLATION section of this manual.

If the caller’s name or phone number is not displayed:

•Make sure you subscribe to a Caller ID service from your local telephone company.

•Make sure the battery is charged.

•Caller ID service might not work when the phone is connected to a Private Branch Exchange (PBX).

If the caller’s name or phone number is not displayed during Call Waiting:

•You should call your service provider to confirm that you subscribe to a combined Caller ID with Call Waiting service.

•The Caller ID with Call Waiting feature is inactive during a power interruption.

•Make sure the battery is charged.

34

Page 35 Page 37
Image 36
Page 35 Page 37
Contents With Caller ID/Call Waiting Advanced American Telephones. All rights reserved Contents Page Using More Than One Handset Before YOU BeginChoosing the Best Location About Caller ID with Call WaitingInstallation Connect the telephone line cord Set the dial mode switchCheck for dial tone Belt Clip HeadsetFeature Settings Telephone Feature SetupHandset Softkeys Handset Features Low Batt ToneRange Tone Keypad ToneTelephone Operation Volume MuteHold Line in UseHandset Icons Page/Handset Locator Operating Range Telephone Directory Store a Number and Name in MemoryView a Memory Number Delete a Memory Number Edit a Memory Number Dial a Memory NumberINTERCOM/TRANSFER Operation Handset to HandsetHandset to All Handsets Transfer CallsAnnounced Transfer Caller ID Operation View Calls LogDial Displayed Call Record Delete Call Records Display Dial OptionsStore Call Record in Telephone Memory Audible Indicators Answering System OperationAbout Mailboxes About AnnouncementsRecord Your Announcement Press Uuntil you hear Set outgoing messageAnswering System Feature Setup Feature SummaryListen To, Save & Delete Messages Delete MessagesCall Screening/Intercept Record a MemoMessage Window Display Connect with the Answering System Voice MenuRemote Access Commands Function CommandBattery Life Charge the Handset Battery PackBatteries Replace the Handset Battery Pack Power Fail Operation Spare BatteryCase of Difficulty If the phone does not work at all, check these items firstIf you have no dial tone To re-initialize the handset and baseIf you hear noise or interference when using the phone If the phone does not ring when you receive a callIf your telephone misdials If the caller’s name or phone number is not displayedRemote Commands Answering SystemPress Machine is off press #0again
Top Page Image Contents