AT&T 2455 user manual Check for dial tone

Page 7

INSTALLATION

4Install the handset battery.

a)Remove battery compartment cover by

pressing on indentation and sliding downward.

b) Place the battery pack in the

handset. Align the metal contacts on the battery with the contacts in the battery compartment.

c)Replace cover by sliding it on its track up over battery case until it snaps firmly into place.

5Charge the handset battery.

•Place the handset in the base (or a remote charging stand, purchased separately).

•Charge the battery at least 12 hours. After the first charge, the battery will quick charge in only eight hours.

6Check for dial tone.

•After the batteries are charged, lift the handset and press P; you should hear a dial tone.

5

Image 7

Contents With Caller ID/Call Waiting Advanced American Telephones. All rights reserved Contents Page About Caller ID with Call Waiting Using More Than One HandsetBefore YOU Begin Choosing the Best LocationConnect the telephone line cord Set the dial mode switch InstallationCheck for dial tone Headset Belt ClipTelephone Feature Setup Feature SettingsHandset Softkeys Keypad Tone Handset FeaturesLow Batt Tone Range ToneTelephone Operation Line in Use VolumeMute HoldHandset Icons Page/Handset Locator Operating Range Store a Number and Name in Memory Telephone DirectoryView a Memory Number Delete a Memory Number Dial a Memory Number Edit a Memory NumberTransfer Calls INTERCOM/TRANSFER OperationHandset to Handset Handset to All HandsetsAnnounced Transfer View Calls Log Caller ID OperationDial Displayed Call Record Display Dial Options Delete Call RecordsStore Call Record in Telephone Memory About Announcements Audible IndicatorsAnswering System Operation About MailboxesPress Uuntil you hear Set outgoing message Record Your AnnouncementFeature Summary Answering System Feature SetupDelete Messages Listen To, Save & Delete MessagesRecord a Memo Call Screening/InterceptMessage Window Display Voice Menu Connect with the Answering SystemFunction Command Remote Access CommandsCharge the Handset Battery Pack Battery LifeBatteries Replace the Handset Battery Pack Spare Battery Power Fail OperationTo re-initialize the handset and base Case of DifficultyIf the phone does not work at all, check these items first If you have no dial toneIf the caller’s name or phone number is not displayed If you hear noise or interference when using the phoneIf the phone does not ring when you receive a call If your telephone misdialsAnswering System Remote CommandsMachine is off press #0again Press