AT&T 2455 user manual Volume, Mute, Hold, Line in Use

Page 12

TELEPHONE OPERATION

Volume

1During a call, select VOLUME, then use the softkeys to adjust the earpiece volume.

2Select OK to save the setting for future calls.

Mute

Mute allows you to hear your caller, but prevents the caller from hearing you.

1Use the softkey to select MUTE. The screen alternately displays

MICROPHONE MUTED! and the previous screen.

2Select MUTE again to return to your conversation.

Hold

When you put a call on hold, you cannot hear your caller, and your caller cannot hear you.

1Use the softkey to select HOLD. The screen displays

CALL ON HOLD.

2Press Por kto return to the call.

NOTE: The handset rings to remind you that the call is being held. If you don’t answer the ring, the call is disconnected.

Line in Use

•When the line is in use by a handset or base, the screen display is similar to:

•When the line is in use by another set on the same line, the screen displays:

2

02 NEW CALLS

RDL MENU MEM

EXTENSION

IN USE!!

VOL MENU MUTE

10

Image 12

Contents With Caller ID/Call Waiting Advanced American Telephones. All rights reserved Contents Page Using More Than One Handset Before YOU BeginChoosing the Best Location About Caller ID with Call WaitingInstallation Connect the telephone line cord Set the dial mode switchCheck for dial tone Belt Clip Headset Feature Settings Telephone Feature Setup Handset Softkeys Handset Features Low Batt ToneRange Tone Keypad ToneTelephone Operation Volume MuteHold Line in UseHandset Icons Page/Handset Locator Operating Range Telephone Directory Store a Number and Name in MemoryView a Memory Number Delete a Memory Number Edit a Memory Number Dial a Memory NumberINTERCOM/TRANSFER Operation Handset to HandsetHandset to All Handsets Transfer CallsAnnounced Transfer Caller ID Operation View Calls LogDial Displayed Call Record Delete Call Records Display Dial OptionsStore Call Record in Telephone Memory Audible Indicators Answering System OperationAbout Mailboxes About AnnouncementsRecord Your Announcement Press Uuntil you hear Set outgoing messageAnswering System Feature Setup Feature SummaryListen To, Save & Delete Messages Delete MessagesCall Screening/Intercept Record a MemoMessage Window Display Connect with the Answering System Voice MenuRemote Access Commands Function CommandBattery Life Charge the Handset Battery PackBatteries Replace the Handset Battery Pack Power Fail Operation Spare BatteryCase of Difficulty If the phone does not work at all, check these items firstIf you have no dial tone To re-initialize the handset and baseIf you hear noise or interference when using the phone If the phone does not ring when you receive a callIf your telephone misdials If the caller’s name or phone number is not displayedRemote Commands Answering SystemPress Machine is off press #0again