AT&T 2455 user manual Handset Icons

Page 13

TELEPHONE OPERATION

Handset Icons

Icon Description

Line in Use

On steadily with no number next to it when a parallel set is in use.

On steadily with one or more numbers next to it to show which extensions are using the line. For example, 12 indicates that Handset 1 and Handset 2 are on outside calls.

Intercom

On steadily with the extension numbers currently on an intercom call. For example, 12 indicates that Handset 1 and Handset 2 are currently on an intercom call.

Battery

Cycles (low, medium, and high) when Handset battery is charging.

Flashes when battery is low.

MMute

On steadily when the handset microphone is muted.

HHold

On steadily when the line is on hold.

RHandset Registration

On steadily when a handset is either not registered, or is searching for a base unit.

11

Image 13
Contents With Caller ID/Call Waiting Advanced American Telephones. All rights reserved Contents Page Before YOU Begin Using More Than One HandsetChoosing the Best Location About Caller ID with Call WaitingConnect the telephone line cord Set the dial mode switch InstallationCheck for dial tone Headset Belt ClipTelephone Feature Setup Feature SettingsHandset Softkeys Low Batt Tone Handset FeaturesRange Tone Keypad ToneTelephone Operation Mute VolumeHold Line in UseHandset Icons Page/Handset Locator Operating Range Store a Number and Name in Memory Telephone DirectoryView a Memory Number Delete a Memory Number Dial a Memory Number Edit a Memory NumberHandset to Handset INTERCOM/TRANSFER OperationHandset to All Handsets Transfer CallsAnnounced Transfer View Calls Log Caller ID OperationDial Displayed Call Record Display Dial Options Delete Call RecordsStore Call Record in Telephone Memory Answering System Operation Audible IndicatorsAbout Mailboxes About AnnouncementsPress Uuntil you hear Set outgoing message Record Your AnnouncementFeature Summary Answering System Feature SetupDelete Messages Listen To, Save & Delete MessagesRecord a Memo Call Screening/InterceptMessage Window Display Voice Menu Connect with the Answering SystemFunction Command Remote Access CommandsCharge the Handset Battery Pack Battery LifeBatteries Replace the Handset Battery Pack Spare Battery Power Fail OperationIf the phone does not work at all, check these items first Case of DifficultyIf you have no dial tone To re-initialize the handset and baseIf the phone does not ring when you receive a call If you hear noise or interference when using the phoneIf your telephone misdials If the caller’s name or phone number is not displayedAnswering System Remote CommandsMachine is off press #0again Press