CAMPUS PAGER
The Campus Pager can send ten different message codes (0-9) and address up to 100 individual (system) pagers.
Attractive features of the Campus Pager system include:
•Nonvolatile memory—stores system and pager codes for over one year, even if the power fails.
•Pager message memory—stores the last eight message codes and lets you review them by pressing a button.
•“Page All” feature—sends a message to all pagers simultaneously.
•Center-loaded antenna—provides up to a maximum of two miles transmitting range, depending on the conditions at the receiving site. You can replace this antenna with an outdoor antenna for extended transmittion range. One of your local consumer electronics stores might carry an outdoor antenna. If you cannot locate a store that sells an antenna, call for technical support.
•“Low Battery” alarm—shows when the pager’s battery level is low.
3.2 Tone Pager (FX801A)
The Tone Pager beeps 12 times every ten seconds. This process is repeated three times and then the pager beeps once every 60 seconds. Pressing the on/off button allows you to view old messages from newest to oldest. Two FX801A pagers come with the FX800A; no pagers come with the FX810A (you must order them separately).
UNPACKING THE FX801A
The FX801A package includes:
•(1) Tone Pager
•This User’s Manual
You can order additional pagers to work with your base unit.
