Polycom SoundPoint IP 450 User Guide
Power and Startup
Symptom | Problem | Corrective Action |
|
|
|
There are power issues. | The SoundPoint IP 450 phone | Do one of the following: |
| has no power. | • Verify that no lights appear on the |
|
| phone when it is powered up. |
|
| • Check if the phone is properly plugged |
|
| into a functional AC outlet. |
|
| • If using PoE, check that the ethernet |
|
| cable is properly plugged into the |
|
| phone and the outlet port. Contact |
|
| your system administrator to ensure |
|
| that you are using a powered port, |
|
| enabled for PoE. |
|
| • Make sure that the phone isn't |
|
| plugged into a plug controlled by a |
|
| light switch that is off. |
|
| • If the phone is plugged into a power |
|
| strip, try plugging it directly into a wall |
|
| outlet instead. |
|
| • Try the phone in another room where |
|
| the electricity is known to be working |
|
| on a particular outlet. |
|
| • If you are using POE, make sure the |
|
| network switch is supplying power. |
|
|
|
84