Ready

3.Plug the other end into the slot under the SoundStation2 Console as illustrated. Then thread the cable through the channels on the underside of the console as shown at right.

4.Plug the Power Adapter Cable into the Interface Module jack

marked then plug the Power Adapter into the electrical outlet.

►The first time the SoundStation2 Avaya is powered up and con- nected to the network through the Interface Module, it will run a brief self-test and synchronize itself with your telephone network. Dur- ing this time the LEDs will blink. When the process is complete you will hear a tone and the LEDs will switch off. This process can take 20 seconds.

The SoundStation2 Avaya is designed for greater room coverage with ex- tended microphones.

►If using the optional extension microphones, connect to SoundStation2 as shown at right.

Place the SoundStation2 Avaya on a flat, stable surface in the center of the room.

MIC 1

► If using the extended hypercar-	MIC 4	MIC 5
diod microphones, for the best
coverage, position as shown in	MIC 2	MIC 3
	MIC 2	MIC 3
the example to the right.
Ready State

SoundStation2 Avaya will display a Ready message upon power up and completion of initialization.

The Ready message is also shown after a call is completed and the phone is avail- able for the next call.

5551212

SP DIAL PH BOOK REDIAL

SoundStation2 Avaya User Guide - 8