Polycom IP 500 manual Headset Auto Mode, Display Contrast, Ring Type

Page 13

Headset Auto Mode

As an option, the headset can be permanent- ly enabled to place and receive calls from any audio keys on the telephone - especially useful for regular headset users. To do this:

1. Press

Menu .

2.Select Settings followed by Headset.

3.Use the arrow and Select keys to en- able Headset Auto Mode.

4. Press Menu to return directly to the main menu.

Subsequent calls to or from this telephone using the headset will activate the icon on the display permanently. Pressing the line keys or Answer soft key to receive a call will now connect to the user’s headset automatically.

Repeat steps 1-3 and select Disable to turn Headset Auto Mode off.

Display Contrast

To adjust the contrast on the display to a comfortable level:

1. Press Menu . Select Settings fol- lowed by Contrast.

2.Pressing the Up or Down soft keys (or volume keys) will increase or decrease the display contrast.

3.Press the Ok or Cancel soft keys to accept or cancel changes.

4. Press Menu or the Exit soft keys to return to the idle display.

Ring Type

There are a total of 21 ring types available on the SoundPoint IP 500 telephone. Users can select different rings to distinguish between lines (on a multiple line configured telephone) or to program a different ring from their neighbor’s telephone.

To change the incoming ring to a desired sound:

1. Press Menu . Select Settings fol-

lowed by Ring Type.

2.(Optional) If multiple lines are used, first select which line to change.

3.Using the arrow keys, highlight the desired ring type. Pressing the Play soft key samples the selected ring type.

4.Press Select to change to the se- lected ring type.

5. Press Menu or the Exit soft keys to return to the idle display.

See also Distinctive Ringing / Call Treatment.

10

Image 13
Contents Menu DelContents Part 15 Rules Introduction Parts ListConnecting Network and Power Source Installing SoundPoint IP 500 SIPAC Power Option In-Line Power OptionAttaching the Base Connecting the Handset and Optional HeadsetFeatures Key Description Key DescriptionsUsing the Handset Using SoundPoint IP 500 SIPUsing Handsfree Speakerphone Mode Using the HeadsetCall Hold Answering a CallMicrophone Mute Local Conferencing Call TimerTransferring a Call Ending a CallCall Forwarding Volume AdjustmentVoice Mail Do Not DisturbDisplay Contrast Headset Auto ModeRing Type See also Distinctive Ringing / Call TreatmentLocal Directory Call ListsEdit Speed DialMultiple Call Appearances Multiple LinesEndCall Select Message Center*,† Voice and Text MessagingPresence / Status / Buddy Lists Distinctive Ringing / Call TreatmentInstant Messaging Phone RebootMultilingual Support Localization Troubleshooting Installation Instructions Safety and ComplianceDisplay shows Network Link is Down Class B Digital Device or PeripheralPlug Acts as Disconnect Device Polycom Limited Warranty and Limitation LiabilityIndustry Canada IC CE and Vcci MarkService Agreements Warranty ExclusiveExclusions Limitations of LiabilityGoverning Law DisclaimerCopyright Notice For information, visit Polycom, Inc Barber Lane Milpitas, CA
Related manuals
Manual 13 pages 62.42 Kb