Polycom Sound Station2 Direct Connect-MERIDIAN manual Passcode, Not Assigned

Passcode

When you select Passcode from the Admin Setup menu, the screen will display whether or not a passcode is cur- rently assigned.

Assign a passcode: ADMIN SETUP

1. Press the Menu button			,		LOCATION
choose Admin Setup using the					PHONE SYSTEM
Scrolling buttons		, and press			PASSCODE
the Select button			. Choose
Passcode using the Scrolling but-					PASSCODE
tons	, and press the Select				NOT ASSIGNED
button	.
					ASSIGN
2. Press the ASSIGN soft key and enter
a three-digit passcode. If you
make an error, press the <DEL soft					ENTER NEW
key to erase the error.
3. Press the SAVE soft key. You may					Passcode:_
press the CANCEL soft key or the					CANCEL	<DEL	SAVE
Exit button		if you choose not
to save the passcode.
►Record the passcode. If the passcode is forgotten,
contact Polycom Support at www.polycom.com/support
and click on “How to Contact Support and Service” for
your local support contact information.
Remove a passcode:
Removing the passcode removes the requirement for an
access passcode for the Admin Setup menu.
1. From the Admin Setup menu,					PASSCODE
choose Passcode using the Scrolling					ASSIGNED
buttons	and press the Select but-
ton	.				CHANGE	REMOVE
2. Press the REMOVE soft key, enter
the current passcode, and press the					ENTER CURRENT
ENTER soft key. If you decide not to
remove the passcode, press the CAN-					Passcode:_
CEL soft key or the Exit button				.	CANCEL	<DEL	ENTER
►If you enter an incorrect pass-
word, you will be notified to try					INCORRECT PASSCODE
again.
►If you make an error, press the					Passcode:_
<DEL soft key to erase the error.							ENTER
					CANCEL	<DEL

SoundStation2 Direct Connect Administrator Guide - 28